• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What have you made?

Druid799 said:
Yup all prescriptions are free , Uni isn’t quite free but it’s a very minimal contribution if your a welsh citizen and your going to a welsh uni . ???????
Click to expand...
Well theres lovely boyo ??

Good system

Regards 

 
Druid799 said:
Yup all prescriptions are free , Uni isn’t quite free but it’s a very minimal contribution if your a welsh citizen and your going to a welsh uni . ???????
Click to expand...
as it should be uk wide ?, well done to the Welsh (& Scots ?) for securing such a set up, although does make you wonder why England couldn't manage it.

 
Grenade launcher is progressing well. Hand forged some barrel bands to lock everthign in place and going to build the trigger mech and a grip in behind it. Just waiting for a slightly longer hose to arrives so I can have the co2 hlder and regulator further back so its not sticking out infront of the grenade launcher. Will waste a tiny bit more gas but will make it nicer to handle and look at. As you can probably see my design has pivoted more towards a gp25 style thing as its simply easier to make. 

View attachment 72385

 
Last edited by a moderator:
Work with someone and figure out how to 3d print most of it and put together a list of the TAG shell/co2 cart adapter/plumbing bits folks would need to finish the launcher and sell that plan set, or just parts packages, or even complete ones.  Assuming you're not working towards this already.

TAG ammo is mega £$, shells are fragile and even more £$ and the TAG GP-25 is big, bulky, big £$ and very heavy from what I've heard.  Something that's small, light, a fair bit cheaper and makes it so that the only real recurring cost is the TAG ammo and the cheap co2 bulbs would be a real nice option.

 
Last edited by a moderator:
TheFull9 said:
Work with someone and figure out how to 3d print most of it and put together a list of the TAG shell/co2 cart adapter/plumbing bits folks would need to finish the launcher and sell that plan set, or just parts packages, or even complete ones.  Assuming you're not working towards this already.

TAG ammo is mega £$, shells are fragile and even more £$ and the TAG GP-25 is big, bulky, big £$ and very heavy from what I've heard.  Something that's small, light, a fair bit cheaper and makes it so that the only real recurring cost is the TAG ammo and the cheap co2 bulbs would be a real nice option.
Click to expand...
I may consider selling 3d print files and kits and a parts list but I dont think id sell finished pieces. If incorrectly sealed and assembled its going to be a lot of hassle for returns or other bad shit if there are problems with them. 

 
Again nothing toooooo epic , 

First game back this coming Sunday , SOOOO question is what to take ? decisions decisions ! ?

At this point best bud who I’m going with pops up and says “let’s do a BHD loadout , we haven’t done a ‘film sim’ in years !” Ok I can dig that , he then says “let’s go rangers every dog and his mother does DELTA” yea a VERY true point there . Got most of the kit bar the helmet so I got a choc chip cover for a mich2000 I had squeezed it on but doesn’t look right to me SO yet another expenditure on kit !?‍♂️ Luckily not a great one as USMCPRO has a good sale on and picked up a cheapo M88 for not a lot of ? tokens . Got rid of the horrible black chinstrap , made a new more accurate one in Olive .

happy now(ish) ! One does so hate being a Geardo !  ?

View attachment 72654

View attachment 72655

 
Last edited by a moderator:
I'm sure there used to be a "what have you 3D printed" page.....anyway,

Tired of swapping chest rigs over when you switch AEG platforms?, fed up of moving pouches on and off your plate carrier when you switch from an M4 to a MP7.

Well I know I was so I knocked these up. Slides into the M4 pouches easily and holds 2 mags each. The mags are held securely so when you remove one the other one isn't flapping about inside the pouch and falling out when you bend over. Right now I've got designs for TM MP7 GBB, AEG Kriss Vector and the ARP 9. I'll probably add the MP5 style mags next.

View attachment 72721

View attachment 72722

View attachment 72723

 
Druid799 said:
Nice ! Any chance you’ll start selling them ? 
Click to expand...
Actually these are just printed on paper. You take the mag apart, the clear plastic piece pops out, stick them down with selotape, trim and re-assemble. I can share file I used to print on a normal paper printer if you want?

 
mightyjebus said:
I'm sure there used to be a "what have you 3D printed" page.....anyway,

Tired of swapping chest rigs over when you switch AEG platforms?, fed up of moving pouches on and off your plate carrier when you switch from an M4 to a MP7.

Well I know I was so I knocked these up. Slides into the M4 pouches easily and holds 2 mags each. The mags are held securely so when you remove one the other one isn't flapping about inside the pouch and falling out when you bend over. Right now I've got designs for TM MP7 GBB, AEG Kriss Vector and the ARP 9. I'll probably add the MP5 style mags next.

View attachment 72721

View attachment 72722

View attachment 72723
Click to expand...
These are excellent if someone sold some for switching from 7.62 to 5.56 mags id snatch them up immediately!

 
View attachment 73032I have started 2 small projects.

I'm making my own custom alloy stock for my VSR10 at the moment.

Really looking forward to making the stock, at least i can make it to suit me perfectly so not having to adjust my frame to accommodate the current length of the stock will be nice.

I'm 6ft 3" and my arms are pretty long, so with a custom stock i can reach out more without having to bunch my shoulders up a bit.

It will have camo graphic wrap which i recently found which looks amazing, after seeing it i was sold, so the air brush will not be coming out for this one.

And will also make a 3D leaf rifle wrap with ivy/moss, and eventually my ghillie for I've always played in full multi-cam and want a ghillie to match the playing fields in the UK. :)

View attachment 73033

View attachment 73148

 
Last edited by a moderator:
mightyjebus said:
Actually these are just printed on paper. You take the mag apart, the clear plastic piece pops out, stick them down with selotape, trim and re-assemble. I can share file I used to print on a normal paper printer if you want?
Click to expand...
Aahh I see , I’ve actually done a similar thing my self for some G36 mags with the plastic rounds you have in G36 real-cap mags . I put them on my printer scanner with a heavy towel over them to isolate them and the actually printed out quite well .?

 
mightyjebus said:
What 7.62 mag pouch (or check rig) are you using?
Click to expand...
Warrior tactical adjustables, i can use them for either and sizing down for 556 is a doddle but getting then set up for my g3 mags after is complete fricking pita

 
You must log in or register to reply here.

Similar threads

A
Calling all that have a 3D printer, MOSQUITO Open Beta test!
Replies
12
Views
5K
Speedbird_666
Speedbird_666
sp00n
What have you just 3d printed (for airsoft)
22 23 24
Replies
471
Views
86K
MrTea
MrTea
Hef Legend
Snipermechanics SRS Guide
Replies
0
Views
7K
Hef Legend
Hef Legend
jeremythegenius
Mil-Tec Ghillie suit review
Replies
5
Views
5K
Happy
Happy
Back
Top