What have you made?

[dykm2]

Made this prop a while ago for some private night games at the Stan. We call it the Big Orange Magic Box.

Key switch to start the countdown timer.

Big red E-stop to stop it.

Flashing strobe to make it easier to home in on.

When the timer runs out the klaxon sounds.

Simples!

Another team mate made it look good. Bits of an old VCR some parcel taped boxes and ofcourse an old Nokia!

View attachment 73147

 

[Shamal]

Made this prop a while ago for some private night games at the Stan. We call it the Big Orange Magic Box.

Key switch to start the countdown timer.

Big red E-stop to stop it.

Flashing strobe to make it easier to home in on.

When the timer runs out the klaxon sounds.

Simples!

Another team mate made it look good. Bits of an old VCR some parcel taped boxes and ofcourse an old Nokia!

View attachment 73147

An all in a pasload case?

 

[Sema Dragun]

Thats freaking awesome, would be great fun.

 

[Enid_Puceflange]

One of our Marshall’s made something similar for use at our local site in Edinburgh ?

View attachment 73172

 

[Guest]

Just a little red dot plate for my buddies TM FNX

View attachment 73262

 

[mightyjebus]

first prototype of a new rail for my CZ58. adding more real estate for bolt on's

View attachment 73398

View attachment 73399

 

[MagpieTactical]

Some neat little bungee cord buckles which can be used (in place of rubber bands/ranger bands) to hold cables on handguards, slings in transit etc. 

Saves having to remove items to get the band down the handguard etc

And can be threaded through gaps like on the AFG below

View attachment 73401

 

[Sema Dragun]

Finally finished my stock, just need to fix/attach the rear stock with a better bracket and paint the grip tan, but other than that it's 99.9% finished.

View attachment 73666

 

[MiK]

Almost done just ran out of green cotton but here is the “fabled” reverse bandoleer I’ve been working on-off-on, but I thought I would share and yes I know the MC pattern is not correct but when some things are on it’s not super noticeable 

 

[Mr. No_Face]

@MiK Fantastic Job on the plate carrier. That's one skill I'd love to add my repertoire.?

• Finished the mould of my current mask and created a third with a more flexible, durable material. Calling this one...."Grey Jaw" I guess.
  
• Got the paint done and coated with some Citadel varnish to protect the Job.
  
• This one will be fitted with 4mm thick clear lenses and a mesh protected nose area. Plenty of ventilation, including a gap between the skull and the lower jaw.
  
• The inside is also lined with padding.
  

View attachment 73835

View attachment 73837

View attachment 73838

Padding

View attachment 73839

 

[Druid799]

@MiK Fantastic Job on the plate carrier. That's one skill I'd love to add my repertoire.?

• Finished the mould of my current mask and created a third with a more flexible, durable material. Calling this one...."Grey Jaw" I guess.
  

Outstanding work there ! Was wondering you ever thought about doing a red splattered one so it looks like your face has literally been ripped off ? Just to entertain the children of course ? ?

 

[Mr. No_Face]

Outstanding work there ! Was wondering you ever thought about doing a red splattered one so it looks like your face has literally been ripped off ? Just to entertain the children of course ? ?

Thanks, Funny enough the first commissioned mask actually came blood splattered but I ended up removing the blood since it looked a little too much. Even for me ?

View attachment 73854

 

[MiK]

@Mr. No_Face Cheers buddeh, am still a little vexed at my schoolboy error in patten but I’m gonna do another sooner than later with any tweaks needed after I run that one for a couple of games.

I think those masks are mental !! I would to attempt making something like that but I have to contend with my spec’s  but I think I have a “Baldrick” on that bouncing about in the nether regions of my brain

 

[Druid799]

Some neat little bungee cord buckles which can be used (in place of rubber bands/ranger bands) to hold cables on handguards, slings in transit etc. 

Saves having to remove items to get the band down the handguard etc

And can be threaded through gaps like on the AFG below

View attachment 73401

Can I ask where’d you get the mini side release from ? 

 

[MagpieTactical]

Can I ask where’d you get the mini side release from ? 

You can ask, I sure as hell can't remember at the moment lol. Will reply again when I find the details. 

Can I ask where’d you get the mini side release from ? 

Greenman bushcraft 

https://www.greenmanbushcraft.co.uk/paracord-store/paracord-buckles-and-accessories/greenman-bushcraft-mini-side-release-buckles.htm

 

[magaz]

A couple of Vickers I made for a EH show a few years back

View attachment 54805

And ad agency I used to work for had a Maxim in the boardroom. Legend has it it was used on the Russian front.

I spend a lot of my spare time behind the sewing machine, either modifying things to fit my hobbit size frame or updating designs to a more modern/useful cut etc. 

The plate carrier was built from scratch using 500D PECOC Hybrid pattern fabric. Based on the Viper VX buckle up plate carrier. (The buckles and cummerbund are Viper - using their buckles allows me to add on any Viper mini rig) I've built two of these now, one in this PECOC pattern and one in BATUS/Opfor Blue DPM. I'm working on a third in good old fashioned Queens plaid DPM 1000D fabric.

The DNG parka was inspired by Hannleitassa's "Krus cut" parkas on Instagram. Cropped to waist length, added a zipper, removed elastic cuffs and added velcro adjustments. Added "raid mod" pockets to shoulders, added actual pockets where the pocket flaps where. I'm going to start a second one soon that will be a pull over like the 0241 TOP. I'm also having some fabric printed in DNG but an Arid colour wayto build one from scratch.

The "Micro fight" clone is copied from a Viper VX mini rig, Again, using  Viper buckles so it's cross compatible. 

From the previews the colour on these looks mental. I'm not sure what colour profile these forums use, but they look completely off to how they should.

View attachment 73954

View attachment 73955

View attachment 73956

 

[Druid799]

Was bored had a couple of unused MC black pouches and material laying around so knocked an ultra-light mini rig together similar to one i’d seen somewhere(can’t for the life of me remember where it was)in OD .

View attachment 74325

 

[PopRocket123]

Finished my version 2 SCAR rail. This version has a monolithic rail to replace the wobbly front sight. 

View attachment 74330

 

[MiK]

So I’ve been “at it” again today and finally started mocking up my ghillie hood/upper and actually got the first one knocked up as a test fit/size.

The hood’s a little tight on top so I’m gonna slap in a panel on to to give me some more head room, I think I’m gonna widen the neck area so I make my head/shoulders more of a triangle than square/circle which the eyes will notice.

I think I’m gonna open the chest area so the edges don’t meet and I might bring the hem up to mid-rift but keep a tail on the back….

Comments and suggestions plz

(and before anyone asks WHY you making it ?? The answer is WHY NOT ! I get a custom fit and the fact I can )

View attachment 74480

 

[Adolf Hamster]

Comments and suggestions plz

i don't think there are many locations in the uk where that would be an effective set of colours