Gears and motor

[Skara]

Worst case it's a reshim and slight modification to the pistol grip (or a new pistol grip altogether) to achieve a proper engagement angle.

 

[Pseudotectonic]

adjusted motor height?

should explain why it works when you pop'd back the old motor in, the height may be adjusted for the old motor but not the new motor.

 

[Aux]

adjusted motor height?

should explain why it works when you pop'd back the old motor in, the height may be adjusted for the old motor but not the new motor.

Click to shrink...

Exactly this! The guy at ak2m4 told me to try to find the perfect height with my thumb and found out that the base plate was too thick even when the middle screw was taken out, sanding it down made it work without overheating.

 

[Rogerborg]

Exactly this! The guy at ak2m4 told me to try to find the perfect height with my thumb and found out that the base plate was too thick even when the middle screw was taken out, sanding it down made it work without overheating.

Click to shrink...

Yup, there are no standards in airsoft, only a series of copies of copies.  A millimetre sanded off here, or shimmed in there, can be necessary.

 

[Aux]

Yup, there are no standards in airsoft, only a series of copies of copies.  A millimetre sanded off here, or shimmed in there, can be necessary.

Click to shrink...

Absolutely blew my head sanding 2-3mm off base plate made the temp go from 75degrees way down to 35 max.