• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Quick Questions & Simple Answers.

A side-question about the Cyma M14 (CM.032, not the SOCOM version)... the length of pull (trigger to butt plate) feels very short at ~13".  I researched on t'web and the Garand had a LoP of 16.5"
Have the airsoft versions (both TM and Cyma) been scaled down for Asian markets, 7/8th scale perhaps, to make them more sellable in that market?

Hah.  To answer my own question, the M14 had a shorter LoP than the Garand.  At (drum-roll) 13.5"
Why didn't I search for that instead of the Garand M1?   Answers on a postcard to Mr Silly Sausage, Table 27, Super Sausage Cafe, Towcester.

 
Last edited by a moderator:
Why is the image size limit so small for posting on the forum.  Using a current smart phone my pictures are too large to post now

 
Anyone tried Gorilla Strike Airsoft in Earl Shilton and if so any good experience?

Cheers :)

 
Need a new battery charger, one that can charge more than 1 at a time 

Any recommendations, there was one people said was good, can’t access site on work laptop so can’t search easily for it

I’ve been using a kong charger via balance leads from Firesupport since 2015 so feel it’s time to upgrade now ?

 
MagpieTactical said:
Why is the image size limit so small for posting on the forum.  Using a current smart phone my pictures are too large to post now
Click to expand...
I’ve found that I need to go through some of my older posts and delete any pics I have posted

But until you do that, I believe if you “screenshot” the image you want to post, it reduces the resolution allowing you to post it up ?

 
RostokMcSpoons said:
Possibly silly question:  I'm looking for a new 7.4v battery with a Deans connector, preferably a fairly small stick one that'll fit any of my guns. 

My usual places seem to be out of stock - any recommended retailers?   As I seem to be good at killing / abusing batteries I'd rather they were disposably cheap, and preferably > 1200mAH
Also: Is there a difference between RC batteries and airsoft, apart from maybe the C rating?  
Click to expand...
I know this is a late reply but I absolutely love www.componentshop.co.uk - I've been buying from them for over a decade. They'll swap out any connector for deans for 50p, and I've honestly ordered a battery like, 15 minutes before the cutoff for next-day delivery and they still swapped it to deans!

They can also make custom battery packs to spec, for no charge - but I don't think that would apply to LiPos, but it's come in handy for me in the past with NimH

 
Last edited:
Enid_Puceflange said:
I’ve found that I need to go through some of my older posts and delete any pics I have posted

But until you do that, I believe if you “screenshot” the image you want to post, it reduces the resolution allowing you to post it up ?
Click to expand...
I ran into the same thing, then I thought about and checked my attachments.   We've got a 100MB limit on our attachments, the tiny size you're being told is the max size is whatever you've got left of that allotment.   So yeah, go back and delete some old / big pictures and you'll be fine.
What is best to do, if you can be bothered, is find the big ones and replace them in the threads with smaller or more compressed versions so you don't lose the usefulness of those old posts... but I think I'll be just deleting the images that don't have much intrinsic value.
And going forward I'll be pasting screenshots into Paint.Net, saving them as JPGs and reducing the size and quality within there.  I can then use the 'choose file' option to insert pics that are now often < 100K in size, and yet still a decent size in the post.

 
Last edited by a moderator:
MagpieTactical said:
Why is the image size limit so small for posting on the forum.  Using a current smart phone my pictures are too large to post now
Click to expand...


Enid_Puceflange said:
I’ve found that I need to go through some of my older posts and delete any pics I have posted

But until you do that, I believe if you “screenshot” the image you want to post, it reduces the resolution allowing you to post it up ?
Click to expand...


RostokMcSpoons said:
I ran into the same thing, then I thought about and checked my attachments.   We've got a 100MB limit on our attachments, the tiny size you're being told is the max size is whatever you've got left of that allotment.   So yeah, go back and delete some old / big pictures and you'll be fine.
What is best to do, if you can be bothered, is find the big ones and replace them in the threads with smaller or more compressed versions so you don't lose the usefulness of those old posts... but I think I'll be just deleting the images that don't have much intrinsic value.
And going forward I'll be pasting screenshots into Paint.Net, saving them as JPGs and reducing the size and quality within there.  I can then use the 'choose file' option to insert pics that are now often < 100K in size, and yet still a decent size in the post.
Click to expand...
What they said up above…….

Except that screenshots might have the opposite effect in some cases these days ….

On my iPhone I’ve just tested out a photo & screenshotted it - original photo size 5.2mb, screenshot of it 12.3mb

I use ‘image size’ to downscale images on my phone, and when my limit was low I did a first stab at deleting old unwanted image attachments then downsized others 

https://apps.apple.com/gb/app/image-size/id670766542

 
I've got a Parker Hale cleaning rod with the pull-through attachment, but that's always a slight faff to find some cotton and cut it to size etc... so I thought I'd pick up a mop and a brush from good ol' Ant Supplies.  
https://www.ant-supplies.uk/maintenance-and-care/uk-spec-rod-attachments/british-thread-rifle-rod-fittings.html

Question is... what size(s)?  They have 0.22" or 0.243" (and 6mm for a couple of 'em).  The mop will have to be 0.243", it's the only size they've got in stock - is that ok? 
For a nylon brush should I go with slightly too small, or slightly too large?

 
RostokMcSpoons said:
I've got a Parker Hale cleaning rod with the pull-through attachment, but that's always a slight faff to find some cotton and cut it to size etc... so I thought I'd pick up a mop and a brush from good ol' Ant Supplies.  
https://www.ant-supplies.uk/maintenance-and-care/uk-spec-rod-attachments/british-thread-rifle-rod-fittings.html

Question is... what size(s)?  They have 0.22" or 0.243" (and 6mm for a couple of 'em).  The mop will have to be 0.243", it's the only size they've got in stock - is that ok? 
For a nylon brush should I go with slightly too small, or slightly too large?
Click to expand...


Their own conversion table says:





Calibre ~ mm


Calibre ~ inches


Wool Mop & Nylon Brushes


Brass & Bronze Brushes


Tornado Spiral Brushes




4.5mm


.17, .177, 6 Flobert


6.50mm


5.2mm


❌




5.5mm-5.6mm-5.56mm


.222, .223


8.00mm


6.50mm


5.70mm




6mm-6.35mm-6.5mm


.243


8.50mm


7.30mm


6.50mm




7mm-7.5mm


7RM, .270


10.00mm


8.20mm


7.20mm




7.62mm-7.65mm


.30, .300, 30-06, .308


11.00mm


8.50mm


7.90mm




8mm


.32


11.00mm


9.20mm


8.15mm




9mm-9.3mm


.38, .338, .357, .375


12.00mm


10.50mm


9.00mm




10mm


.40


13.00mm


12.00mm


10.30mm




12mm


.44, .45, .470


15.00mm


13.00mm


12.00mm




12.7mm


.50


16.00mm


14.00mm


❌




14mm


.55


17.00mm


15.00mm


13.80mm




TOLERANCES


+/- 1.0mm


+/- 0.5mm


+/- 0.2mm







So yeah, the 0.243" calibre mop will be fine. Not sure you'll need a nylon brush unless your barrels are getting particularly shitty.

 
Last edited by a moderator:
Now why didn't I spot that?  Because I didn't scroll down very far... 
Anyway, thanks - good info!

Never underestimate the likelihood of 'shitty'  ;D    Knowing my luck, my office will have an infestation of ants and they'll do a dirty protest in there!

 
Where do people go for original TM replacement parts? I'm trying to find a TM g18c frame but everywhere sells guarder or aftermarket frames, but nowhere sells TM ones. Or am I drawing a blank because of trademark issues? Cheers

 
mintsauce5 said:
If it’s the lower frame eagle 6 have one in stock 

https://eagle6.co.uk/shop/catalog/product/view/id/1852/s/tokyo-marui-g18c-lower-frame-black-for-g18c-gas-blowback-pistol-series/
Click to expand...


Thank you! Wow that's expensive. I was after a TM part because I was expecting to be cheaper than the guarder. Fire support have the TM frames out of stock at £10 a pop. But maybe that price is from years ago. If that's the going rate I'll probably be better off with a guarder :)

 
Daveoc33 said:
Thank you! Wow that's expensive. I was after a TM part because I was expecting to be cheaper than the guarder. Fire support have the TM frames out of stock at £10 a pop. But maybe that price is from years ago. If that's the going rate I'll probably be better off with a guarder :)
Click to expand...
Have a look on Rainbow 8 for original TM or Guarder

 
Anyone watch TWD?, curious as to what goggles the commonwealth ‘army’ wear?, ESS?, Revision?

 
You must log in or register to reply here.

Similar threads

N
What grinds your gears on forums
4 5 6
Replies
118
Views
27K
Lyndication
Lyndication
Gunboat Diplomat
Is Discord a terrible alternative to forums or am I just using it wrong
Replies
18
Views
806
BigAl
BigAl
Grave Squirmer
Unable to list new classifieds advert
Replies
6
Views
448
novioman
N
Tank423
Boots for big boys
Replies
18
Views
1K
Tank423
Tank423
E
Sites worth travelling to.......
Replies
16
Views
629
Jaylordofwaargh
Jaylordofwaargh
Back
Top