Hi guys this sounds like a silly question but how far should I screw my storm reg down on the tank valve?
If I screw it down till it stops, it destroys the tank neck seal, it does this on both of my tanks and it does it regardless of if I use rubber, nitrile or urethane seals lubed or unlubed.
The inside of the reg threads look and feel smooth.
Any ideas guys?
TIA
Andy
If I screw it down till it stops, it destroys the tank neck seal, it does this on both of my tanks and it does it regardless of if I use rubber, nitrile or urethane seals lubed or unlubed.
The inside of the reg threads look and feel smooth.
Any ideas guys?
TIA
Andy
Last edited by a moderator:
