Which regulator?

[sonofsammo]

I need a new regulator, as mine is deceased (and I didn't like it that much either - it was a balystik)
I need something that works well for quick single shots - but I don't know what to look for.

I've been using @rocketdogbert's redline reg, as he kindly lent it to me, but they don't seem to be in stock anywhere.

So - what should I get?
Any help would be much appreciated.
TIA ?

 

[Guest]

I’d get a Redline SFR......best there is ??

 

[Adolf Hamster]

Its an interesting question, i also run a balystik and while it's definately passable i cant help but feel there's better out there. Tbh i was leaning more towards polarstar's mrs on the basis they of all people should understand the need for quick refresh rates.

But i'm interested to hear what folks views are.

 

[Shizbazki]

Tbh i was leaning more towards polarstar's mrs on the basis they of all people should understand the need for quick refresh rates.

I don't think Polarstar will be too pleased you're making moves on his missus ?

On a more serious note, if you can go after the Redline SFR if you can get one, worst case scenario will be importing one from the US, check out Amp[ed airsoft as they are the go to HPA specialists.

I will say one thing about Redline, great customer service even when its like 5am US time they got back to me and sent me a replacement part free of charge.

 

[LukeN]

I use balystik, seems to be the average choice for most.

I get about 2280RPM (38RPS) and run around 110PSI on my support loadout, pressure between shots ducks down to a low of 90PSI, it's very consistent and I've had it for over a year now with absolutely 0 issues. 

Only quibble is the fact that the gen I use requires a seperate key to adjust the PSI on the reg, most new / high tier regs have turnable dials.