• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Which Airsoft Gun Should I Purchase

eeeevvvvveeeeeeerrrrryyyyyyy one has black guns .... most of the time thats what i look for lol

 
Just for looks (maybe) is there (obviously) a silencer that can fit the G&G Combat Machine Raider L, if so, could you give me a link to it please? Thanks, also , after testing out a few Airsoft rifles and my local Airsoft Store, the guns are quite weighty in my hands, and ergonomically, i felt the fore grip, had a big impact and helped me maneuver and use the weapon, could you guys give me any brands (or LINKS!) to a good, tough, reliable fore grip? Thanks once gain :)

 
Last edited by a moderator:
Tell me this, Woodland Skirmishing, Tan Gun; HOWZAT?
camouflaged ;) brown gun in an environment with lots of greens/browns ;)

i also brake up the silhouette of mine with colored RIS armour

any silencer with the correct thread will fitt, i forget if its a 14mm ccw or 14mm cw

 
camouflaged ;) brown gun in an environment with lots of greens/browns ;)

i also brake up the silhouette of mine with colored RIS armour

any silencer with the correct thread will fitt, i forget if its a 14mm ccw or 14mm cw
Ahaha, thought so B)

 
PTS RVG's are good. ;) ... But kinda pricey and not that neccesary. If you must, just get a g&p stubby raider foregrip.

 
Last edited by a moderator:
PTS RVG's are good. ;) ... But kinda pricey and not that neccesary. If you must, just get a g&p stubby raider foregrip.
Cool, ill go with the PTS RVG's, their inexpensive, good quality and will fit my hands perfectly, would i need this? http://www.zerooneairsoft.com/product_info.php?cPath=277&products_id=6959

Also, do you know any suppresors that will fit the CM16 Raider L? Quite cheap like under £40 if you can please! I have researched myself and have found one, which looks horrid, so thats just a no.

Thanks

 
Cool, ill go with the PTS RVG's, their inexpensive, good quality and will fit my hands perfectly, would i need this? http://www.zerooneairsoft.com/product_info.php?cPath=277&products_id=6959

Also, do you know any suppresors that will fit the CM16 Raider L? Quite cheap like under £40 if you can please! I have researched myself and have found one, which looks horrid, so thats just a no.

Thanks
Not really, £12 waste really. And sure.you havent found any suppressors? Virtually everyone is 14mm ccw! Aha, Spartan Doctrine are dead cheap, or Sp00ns ones are good, but abit pricey for a silencer, in my opinion. Id go Spartan, £6!
 
Last edited by a moderator:
You remember from 'Science' that stuff has a centre of gravity, right? So the further some part is from the centre, the more its weight affects the centre of gravity... A suppressor is just such a part - they aren't that heavy, but it's weight that tips the balance of the rifle forward, which makes your offside arm (left if you're right handed), which will be weaker anyway, ache more. They don't really do much either, because most of the sound an AEG makes isn't coming out of the barrel. Still, they can look cool, so why not...

https://www.google.co.uk/#bav=on.2,or.r_cp.r_qf.&fp=7fcd4423faf4195f&q=spartan+doctrine+silencer ?

 
You remember from 'Science' that stuff has a centre of gravity, right? So the further some part is from the centre, the more its weight affects the centre of gravity... A suppressor is just such a part - they aren't that heavy, but it's weight that tips the balance of the rifle forward, which makes your offside arm (left if you're right handed), which will be weaker anyway, ache more. They don't really do much either, because most of the sound an AEG makes isn't coming out of the barrel. Still, they can look cool, so why not...

https://www.google.co.uk/#bav=on.2,or.r_cp.r_qf.&fp=7fcd4423faf4195f&q=spartan+doctrine+silencer ?
Wow, your really intelligent! Thanks and i still cant seem to find one 'silencer' in black...could you please take a look and link me up please? Oh and also: Your saying is should get this http://www.componentshop.co.uk/7-4v-1450mah-cranestock-battery. and this http://www.componentshop.co.uk/800ma-charger-for-2s-or-3s-7-4-11-1v-battery-packs-complete-with-mains-power-supply.html instead of this http://www.fire-support.co.uk/product/kong-power-battery-charger-support-for-lipo-life-li-ion-nicd-nimh and this http://www.fire-support.co.uk/product/vapex-74v-1450mah-25c-lipo-battery-cranestock-airsot-rechargeable

 
Really?

http://shop.ehobbyasia.com/spartan-doctrine-40x200mm-light-weight-silencer-14mm-cw-ccw.html

or you could ring up RedWolf UK and ask them when they'll have a black one in next / to get one from HK for you.

& the battery is the exact same one from Component Shop as Fire Support, but cheaper. I've never used a Kong charger, but if it's the same people who make the King Kong MOSFET's (which I say so somebody else who may know can tell us), it will be good. I can tell you that Turnigy chargers are good and easy to use as I have one (Accucell 6 which is more expensive than the one I'm recommending, but I wanted to charge a greater variety of batteries).

You don't need to charge various NiMh batteries as well as LiPo's, so that one is perfect. It's not only cheaper than the Kong one, but you can order it at the same time as your battery and save P&P. That said, I recommend that you buy 2 of those batteries. I would not be surprised if you run one down before the end of a day, but also because it is always good to have a spare.

You don't actually need a LiPo Alarm, so long as you trust yourself to remember that if your gun slows down you MUST stop pulling the trigger otherwise you risk over-draining your battery and damaging it permanently. If you have a spare battery, you'll not be put in the position where you think the gun may be slowing down, but you're not sure if it is slow enough to have to stop, and you don't want to stop because you're having such a laugh spraying BB's all over the opposition!

Component Shop ~ 2 x Vapex 7.4V Crane Stock Batteries & Turnigy LiPo Charger + 1st Class Recorded Shipping = £41.44

Fire Support ~ 2 x Vapex 7.4V Crane Stock Batteries & Kong Multi Charger + Recorded Shipping = £57.50

 
Not being funny here jourdan, but surely you can look for our suggestions yourself? Just google whatever it is you want in whichever colour you want, it's extremely simple.

 
Not being funny here jourdan, but surely you can look for our suggestions yourself? Just google whatever it is you want in whichever colour you want, it's extremely simple.
I know, i said that, but i literally cannot find one in black, or in stock, or in the Uk, just a little help, and yes, you guys have helped me soo much; like Ian, Shinobi etc. So please can you help?

 
Not being funny here jourdan, but surely you can look for our suggestions yourself? Just google whatever it is you want in whichever colour you want, it's extremely simple.
Think you've just echoed what we have all been thinking! :D

 
Don't be afraid to order from abroad, Jourdan. Most shipments arrive safely and well within the estimated time. Technically you are supposed to pay VAT on items from outside the EU which cost you over a set amount, about £15 IIRC, plus a handling fee of £8-ish. But in practice, unless it's a big package, or a gun, 90% of packages from China or HK will not be examined by customs and you'll not have to pay anything.

 
Don't be afraid to order from abroad, Jourdan. Most shipments arrive safely and well within the estimated time. Technically you are supposed to pay VAT on items from outside the EU which cost you over a set amount, about £15 IIRC, plus a handling fee of £8-ish. But in practice, unless it's a big package, or a gun, 90% of packages from China or HK will not be examined by customs and you'll not have to pay anything.
OK cool thanks

 
I believe Airsoft Clubs shipping for one-two small objects (Suppressors, nothing else lads :P ), is only like normal UK postage. And then possibly Customs as Ian said, but unlikely ;)

 
Not being funny here jourdan, but surely you can look for our suggestions yourself? Just google whatever it is you want in whichever colour you want, it's extremely simple.
I hear what you're saying there, but as a recent convert myself having had no previous experience with the hardware the only reason I didn't post a similar barrage of questions was because I have a good mate that's into airsoft who guided me through the "buy this it's good"/"don't buy that it's worthless crap" phase. If you're presented with a web page full of different suppressors for example, if you've never used one before you wouldn't necessarily know that they have different threads (CW/CCW) or that they make three parts of f-all difference to the noise coming from the gun. You'd have no idea that while the internals of a G&G Combat Machine are basically the same as a Top Tech, that the Top Tech will weigh something approaching the mass of Guildford or that if you forget to wind your high cap mag you will find yourself looking rather foolish when BB's stop coming out the pointy end in the middle of a firefight!

At least Jourdan_S has had the decency to limit his questions to one thread unlike some spamtastic types that have recently frequented this here forum. Cut him some slack.

 
Back
Top