What have you made?

[Davet]

DIY holster wrap - cut up an old MTP shirt, added a bit of spray glue. Yes it looks a bit rough and ready close up but I don’t care, want it to have a bit of patina to it so it looks used.

 

[ButcherBill]

Novoritsch SSG77
Spare outer barrel extension I happened to have (& was the perfect length)
H-Bar muzzle device & got from a store in Canada several months ago (as a just in case I build an H-bar)
a touch of flat black paint I had in the shed
&
a shit load of swearing coz I bought Tap and Dia sets off Amazon for £63 that didn't work the way I wanted but the dremmel I had lying around did the job.

Anyone got a 40 rnd mag for an Aug?

 

[PopRocket123]

I designed a new trigger for my SCAR H AEGbut the finish as strength wasn't good enough so I printed it without the pin and turned an aluminium one on the lathe

 

[Dumphole]

Srs angled foregrips.

 

[Dumphole]

I also made some grenade holders for my Frag-C's. They use a piece of rubber tube down the bottom which is compressed by the grenade and in turn holds them in place. A thin printed l shaped piece slides through the molle and is held in in place by a single bolt. You can pull them out really quickly and send them on their way. You can also leave them with the safety off as the 'plunger' can't move to the side but if you jumped really hard it could travel vertically and hit the primer.

 

[Jez_Armstrong]

Grenades, lots and lots of Grenades

 

[The_Lord_Poncho]

Grenades, lots and lots of Grenades

Click to shrink...

Insane! Are these the 3d printed ring cap examples? If so, what model - they look great.

 

[MrTea]

Grenades, lots and lots of Grenades

Click to shrink...

They look great. Who designed them? Are they mostly or totally 3D printed (except hardware ofc).

 

[Jez_Armstrong]

Insane! Are these the 3d printed ring cap examples? If so, what model - they look great.

Click to shrink...

No I don't use the caps they suck, these use 209's

 

[mightyjebus]

I made around 60 pairs of the original fan glasses but I've now updated the design to be a single wire and foldable. first 5 sets now made and I've got orders for another 2. They run off a USB battery pack and I did the test run 2 weeks ago and they kept me fog free the whole time wearing them.

 

[Jez_Armstrong]

Another batch made, first batch all gone

 

[Jez_Armstrong]

Red imcomimg

 

[Colin Allen]

Red imcomimg

Click to shrink...

Are they impact or timed? How much are you selling them for?

 

[Jez_Armstrong]

Are they impact or timed? How much are you selling them for?

Click to shrink...

Impact, £25