• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

nice stock on them and the revised polymer receivers look nice - no big white CM

got their own special unique electronic trigger switch unit & fet

is that the 3 round burst mosfet in there on the new SRL models

very nice looking gun

(I'm sure their fet's and the new trigger switch is gonna be ok)

 
nice stock on them and the revised polymer receivers look nice - no big white CM

got their own special unique electronic trigger switch unit & fet

is that the 3 round burst mosfet in there on the new SRL models

very nice looking gun

(I'm sure their fet's and the new trigger switch is gonna be ok)
Yeah weirdly I'm not even an m4 fan but this one won me over.
It has a 3 round burst yeah. Not sure I'll use it as my cqb site is single shot only.

 
Last edited by a moderator:
not 100% certain but sure you can toggle 3 or 1 shot mode

I know it must be very anti-geezer-ish but maybe it might be worth a look in the

man, manu, - damn it is so hard to say it

M A N U A L - manual - done it, woohoo that is always a tricky one to say let alone look at & use

and yeah - the new receivers and the new craney stock looks damn nice

 
Last edited by a moderator:
I've had a look at beastmodes New rifle

Very nice & very light, it feels like plastic but it isn't plastic, it has the metal key mod rail aswell, more weight at the back so it'll be heavier with a battery, its got dual fire selector & mag release catches plus ambidextrous charging handle

only draw back about the stock is the spring loaded pin doesn't lock into the holes without some man handling

 
Last edited by a moderator:
I've had a look at beastmodes New rifle

Very nice & very light, it feels like plastic but it isn't plastic, it has the metal key mod rail aswell, more weight at the back so it'll be heavier with a battery, its got dual fire selector & mag release catches plus ambidextrous charging handle

only draw back about the stock is the spring loaded pin doesn't lock into the holes without some man handling
think it is a new polymer receiver but with metal keymod rail

pretty sure it is a plastic/polymer receiver or it really is f*cking good value if them new CM receivers are metal

the extra dosh over a £130-£150 normal polymer receiver CM is for the 3rnd fet and keymod rail

much like the bot 300 - just a single shot fet using old style polymer CM receiver

Stock is a crane variant of the GOS-V2 or something and should of been fitted to FireHawk amongst others

the burst mode can toggle to semi 1 shot or 3 rnd burst by holding trigger for 10 seconds in semi selector mode

if its full metal think I gotta make up an excuse to missus to try and increase my G&G collection once more

but really trying to ease up a bit now

youtube link but bloke talks like a nob btw:


me on the other hand I am a nob as well as talking like one :D

 
Last edited by a moderator:
New mag for my 4.3 Hi-CAPA so I can try fixing its leaky one and not cry if I balls it up.

 
It's a polymer receiver but feels very strong. Metal keymod rail. And I paid £167 for it so not much more. The reason I got it was for the electronic trigger and mosfit which makes the trigger response really quick. I may eventually swap over to a metal receiver but not to fussed at the moment.

I got the 3rd burst to work. All you have to do is hold down single fire for 10 seconds. Then switch over to full auto auto and you've got 3rnd burst mode.

I have the srs model which is the 7inch rail.

 
Last edited by a moderator:
cheers for confirming that sir - still a lovely receiver as I said earlier

saw 1 left in stock last week at LWA but only just about managed to silence the buy me buy me screams in my head

the receiver and the stock is what I like the most - the ambi mag & charging handle is not a biggy but the design of receiver is gorgeous etc....

very nice gun - time will tell if super duper new trigger switch module is a good robust idea mechanically wise

but only just talked myself out of it - a very very close battle going on in my head

sexy gun - slightly jealous but very pleased for ya - reckon we will see a few people going for this 3rnd fetted sexy CM

good ol' G&G parts pdf....

http://guay2.com/web/drawings/cm/CM16_SRS_explode.pdf

coz was looking to see if the stock is gonna be called the GOS-V3 or something but not found the exact type/model yet

(might see how much - probably silly money but hey ho)

 
Last edited by a moderator:
Given the rate at which G&Gs sell, I hope that such a large amount of production of stock guns with MOSFETs combined with so many people using them might actually start to finally make a change in the rest of the AEG manufacturing world. We're long overdue for the likes of G&P, ICS and VFC to be including FETs in all their electric guns, but as per usual it takes about a decade for even small changes to happen.

Maybe once a large portion of the market gets accustomed to the much improved trigger response and the other advantages these new G&Gs have, the manufacturers who don't include a FET will have to up their games to carry on making sales.

Might well not happen but fingers crossed.

 
alas majority of stuff is just knocked out to keep costs down to remain competitive...

even if fet's fail - the donkey work of wiring in has been done already to replace fet with better bells n whistles one if needed

The other thing I'd like to see is like a slightly better build in most guns

Can't be THAT hard, to correct AoE, better head & nozzle ffs so gun performs and functions that bit better

Not talking about a mega time consuming custom bespoke build where hours are taken to check/assemble

But surely - stop calling me Shirley

Surely - they could add in a o-ring nozzle, better piston o-ring & better head with AoE nearly done or corrected a bit better than stock

just using a few better parts probably only a few dollars each part would save the owner having to get it done at some point

yes a little more cost - but a better performing gun would sell itself even if it cost say $10 to $15 more

until then they will just be knocking out the same old same old stuff that may need finishing off a little

Echo1 & Krytac might be using a little more care - but wtf don't the main companies do this anyway ?

 
Hopefully he's using it at strike force in Gloucester next Sunday & if the switch & fet holds up to semi only, then I'll consider swapping out the trigger contacts for the micro switch trigger & fet

 
Last edited by a moderator:
Got a pair of Bates falcons, my Oakley Si's weren't high enough. Need to have a boot clear out, got too many pairs I never use. Picked up a few more bits for my modern PMC kit and added a few more little bits to my Gothic serpent Delta and ranger kit stash.

 
Got to say that the HK45 is my favourite gun out of all the ones I own. It's as fun to shoot as it was over a year ago when I bought it.
I tried one for size and feel at the Airsoft Expo and it just felt right. I've been agonizing over a WE or a TM Sig P226 because they're both cheaper and then I found £70 left over from some cash I got for my birthday. Job done.

Actually - what holster do you use for it?

 
Last edited by a moderator:
I tried one for size and feel at the Airsoft Expo and it just felt right. I've been agonizing over a WE or a TM Sig P226 because they're both cheaper and then I found £70 left over from some cash I got for my birthday. Job done.

Actually - what holster do you use for it?
I had to import a Serpa H&K P30 holster from the US, but that fits perfectly. I used the Midway UK website so didn't have to pay import costs, I think they've changed names or something since. Hopefully the holsters are more prevalent now.

The only thing I found with mine was the left handed slide release sort of needed flicking to release when I first got it. This went away after a couple of games though.

 
I had to import a Serpa H&K P30 holster from the US, but that fits perfectly. I used the Midway UK website so didn't have to pay import costs, I think they've changed names or something since. Hopefully the holsters are more prevalent now.

The only thing I found with mine was the left handed slide release sort of needed flicking to release when I first got it. This went away after a couple of games though.
Cool, cheers. Thinking of the Fobus light-bearing holster for the USP/P226 as I need a torch on mine. Like this one: http://www.tactical-kit.co.uk/fobus-lightlaser-bearing-holster-em17-ls-sig-p226--hk-usp-14542-p.asp

 
I've got a Kydex holster en route for my KWA P226 with X300. Massively looking forward for it to arrive.

 
Back
Top