-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
The 'What have you just bought' Thread
- Thread starter Cameron364
- Start date
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
Just picked up a 2nd hand full face mesh mask to have an experiment with.
I'm half tempted to buy some grey wool to put a tactical chin warmer and eye shades on it and wear it with my pakol, but i've had an idea in the back of my mind for these things for nearly 2 years so that is most likely the way i'll go - turning a section of it over the mouth into a hamster cage stylee door to allow easy drinking and smoking...
I'm half tempted to buy some grey wool to put a tactical chin warmer and eye shades on it and wear it with my pakol, but i've had an idea in the back of my mind for these things for nearly 2 years so that is most likely the way i'll go - turning a section of it over the mouth into a hamster cage stylee door to allow easy drinking and smoking...
P
PT247
Guest
love my Blue Force Gear MP7 chest riggot my blue force gear triple in the posthappy days! good bye annoying velcro mag pouches hello easy quicker mag changes
Liam Porter
Supporters
- Jun 3, 2011
- 1,320
- 45
That will be the most ridiculous-looking thing ever. Why not just get a lower half and then pull it down to your neck when you want food/drink/smoke?
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
Because Liam, ever since i got shot just under the eye between a loose 1/2 face and goggles, i wear them with 2 straps, tight to my face so they don't move when i run -
which is a pain in the hole to fiddle with, especially if i'm also wearing a headset.
A simple door that latches tight back in place - what could be simpler to operate?
which is a pain in the hole to fiddle with, especially if i'm also wearing a headset.
A simple door that latches tight back in place - what could be simpler to operate?
Russe11
Members
- Oct 30, 2013
- 1,424
- 893
CaptainSwoop
Members
- Sep 9, 2013
- 665
- 267
I think we are straying in to areas best left alone!
JackHG
Members
- Feb 3, 2014
- 104
- 30
Sako
Members
- Jan 19, 2014
- 281
- 29
Ian, it may be easier to have one side of the mask with Velcro, so it could be opened and pulled aside.
TheFull9
Supporters
- Dec 17, 2011
- 3,572
- 2,341
Tuesday, component-shop stuff to keep the electric guns ticking over. They do an extremely good deal on a set of kit for soldering.
Wednesday, 'merica.
Separated out the swag.
Thursday, WGC Shop.
Also a reflex Mk2 from Dave's Custom Airsoft.
Friday, some things I already owned but the hydro dip is new.
Just waiting on a couple more combat shirts from UR-Tac.
Wednesday, 'merica.
Separated out the swag.
Thursday, WGC Shop.
Also a reflex Mk2 from Dave's Custom Airsoft.
Friday, some things I already owned but the hydro dip is new.
Just waiting on a couple more combat shirts from UR-Tac.
P
PT247
Guest
KJ Works M700 Take-Down.
With 2x 30 round mags nine ball bucking and a Prommy hop tensioner.
Gun is pumping out 520 fps on green gas so having to down grade to 144a giving 480 fps at room temp until I have the CO2/HPA rig to regulate it to bang on 500 fps. Need to sort a 6.01/6.03 tightbore as soon as poss too, http://www.surplusstore.co.uk are stocking the Madbull SS TBs now which I am tempted with, but they are AEG barrels so not sure how to do the conversion so may have to get the Falcon inner barrel set when it comes back in stock at ehobby asia
geoffreym
Members
- Dec 7, 2009
- 879
- 228
just to warn you that the actual soldering iron is of low quality, and has great difficulty heating the solder to an appropriate temperature, the rest of the kit is pretty decent.Tuesday, component-shop stuff to keep the electric guns ticking over. They do an extremely good deal on a set of kit for soldering.
Wednesday, 'merica.
Separated out the swag.
Thursday, WGC Shop.
Also a reflex Mk2 from Dave's Custom Airsoft.
Friday, some things I already owned but the hydro dip is new.
Just waiting on a couple more combat shirts from UR-Tac.
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
And for those of you who remember my earlier extravagance dropping $31.50-ish on a King Arms fire selector lever for AK's? Just got an email saying they're out of stock V^^Vgrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!
TheFull9
Supporters
- Dec 17, 2011
- 3,572
- 2,341
Interesting, will have to test it out, thanks for the heads-up. Luckily I've got my grandad's old soldering iron that was handed down and probably made in the 50s but still gets hot pretty much instantly, so if the new option isn't up to task I should still be alright overall.
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
Those old skool soldering irons are great for getting hot quick, but just be aware that the semiconductors in MOSFET set ups can be destroyed by overheating. If you're going to solder onto the board with a spanking iron, use a crocodile clip on the nearest components to act as a heat sink.
ronnyjodes
Members
- Feb 4, 2013
- 124
- 78
Who says airsofter can't look FABULOUS.
My half face mesh mask came today. Not the most exciting purchase but better than having to pick my teeth off Tac House's floor............
My half face mesh mask came today. Not the most exciting purchase but better than having to pick my teeth off Tac House's floor............
P
PT247
Guest
Let me know how you get on with this as thinking of getting one when back in stock for my M700Falcon 6.03x455mm TBB - £33 posted ~ ehobbyasia.com
And for those of you who remember my earlier extravagance dropping $31.50-ish on a King Arms fire selector lever for AK's? Just got an email saying they're out of stock V^^Vgrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!
Similar threads
