Saiga 12 zentico stock

[WoodLau18]

Has anyone changed the stock the tm saiga for a zentico style one? Presuming it’s not a straight swap 

View attachment 129010

 

[hitmanNo2]

I've not done it but it seems like it would be pretty straightforward with a 1913 end plate and a 1913 adapter for the Zenitco stock.

 

[sp00n]

I bought the 5ku CYMA one and other then drilling the folding pin to accept the TM pin, there was a lot of dremel’ing to get it to fit (2-3mm off the top, flattened bottom and flattered face, could also do with more profile as the catch has to be pressed). I posted some pics up on the HRC discord.

 

[WoodLau18]

I've not done it but it seems like it would be pretty straightforward with a 1913 end plate and a 1913 adapter for the Zenitco stock.

Apparently they have been out of stock for over a year the 1913 to zentico adapter. Would probably see if a commercial company like Airtac or someone similar could 3d print them 

 

[WoodLau18]

https://cults3d.com/en/3d-model/game/tokyo-marui-saiga-5ku-pt1-adapter
 

if anyone has access to a printer, bloke sent me this on a discord server