Quick Questions & Simple Answers.

[Ian_Gere]

Ah, I assumed it was the pin between the stock and receiver. do E&L do replacement parts for their 105's?

No idea about spares, mate.

I'm pretty sure that it isn't the pin that causes the problem - i mean, it'd have to be such an obvious flaw, ie being too thin, for it to be the pin at fault - surely the manufacturer would have sussed and sorted it out? I spose you'd be able to tell on your own gun though - does it wobble when the stock is unlocked from the catch, when it's just the pin holding it? I've just checked my E&L and it's rock solid, but it also seems unlikely that the bit of the stock which locks with the catch could become bent, or the catch itself - i'd imagine that the welds holding the stock together would fail first, so i dunno, maybe the pin on yours is moody...

 

[proffrink]

Anyone know where I can buy one of those ProWin Gen 2 GI 20rd style GBBR magazines? I've looked but can't for the life of me find one in stock.

 

[sp00n]

Question:- I have 3 mags for my we g18c, there all filled with the same gas and bbs, yet 1 of the mags, ridiculously over hops bbs. (And I keep forgetting which mag it is)

All mags hold gas, with no leakage etc

Any idea why?

(Posted from mobile so no red)

 

[djben9]

picking up some bits at UA tomorrow from Firesupport

ICS CXP-UK1

Lipos charged (they said)

set up for 0.20's

(RED>>>>>>> ) with the 45 and 180 rd mags, anything I need to do?**

or can I just plug and play?

no idea why PC wont let me type in red, gotta be windows!

 

[ImTriggerHappy]

picking up some bits at UA tomorrow from Firesupport

ICS CXP-UK1

Lipos charged (they said)

set up for 0.20's

(RED>>>>>>> ) with the 45 and 180 rd mags, anything I need to do?**

or can I just plug and play?

no idea why PC wont let me type in red, gotta be windows!

Ask them to set the hop for 0.25 and use those instead. A lot more accurate than 0.2 bbs.

 

[PT247]

Question:- I have 3 mags for my we g18c, there all filled with the same gas and bbs, yet 1 of the mags, ridiculously over hops bbs. (And I keep forgetting which mag it is)

All mags hold gas, with no leakage etc

Any idea why?

(Posted from mobile so no red)

is one of the mags a TM mag?

 

[djben9]

Ask them to set the hop for 0.25 and use those instead. A lot more accurate than 0.2 bbs.

is it easy to do after anyway?,

got a few 1000 .2's to use up first!.....3700 I got back In July!

tomorrow may be a full auto day! haha

 

[Ian_Gere]

(RED>>>>>>> ) with the 45 and 180 rd mags, anything I need to do?**

or can I just plug and play?

I find it useful to put a single drop of silicone oil down the BB tube of mid/low cap mags and then fill them as full as i can possibly get them. I do not fire those 1st BB's, just let them out by poking the spring catch, then fill the mag again with the same BB's and let them out again - do this a few times more to get a very thin coating of oil all the way through the mag and work the spring a bit, because they usually do not hold as many BB's as advertised when brand new.

 

[djben9]

ok, so need to buy some oil on way tomorrow

may use the high cap 1st and sort this out when I get back home

 

[sp00n]

is one of the mags a TM mag?

There all we

 

[Ian_Gere]

ok, so need to buy some oil on way tomorrow

may use the high cap 1st and sort this out when I get back home

Yeah. My advice is to get oil in a dropper bottle not a spray can so you can apply exactly as much as you need, exactly where you need it, rather than it going all over in an aerosol...

 

[Zak Da Mack]

No idea about spares, mate.

I'm pretty sure that it isn't the pin that causes the problem - i mean, it'd have to be such an obvious flaw, ie being too thin, for it to be the pin at fault - surely the manufacturer would have sussed and sorted it out? I spose you'd be able to tell on your own gun though - does it wobble when the stock is unlocked from the catch, when it's just the pin holding it? I've just checked my E&L and it's rock solid, but it also seems unlikely that the bit of the stock which locks with the catch could become bent, or the catch itself - i'd imagine that the welds holding the stock together would fail first, so i dunno, maybe the pin on yours is moody...

Sorry it took me so long to reply, but it looks like the latch might be bent or isn't sitting where it should properly? It seems to stick out a bit.

 

[Ian_Gere]

Sorry it took me so long to reply, but it looks like the latch might be bent or isn't sitting where it should properly? It seems to stick out a bit.

That does look dodgy. It looks like the spring that holds the latch isn't working properly, but that said, my spring feels fine but nonetheless it is possible to force the button to jam by pressing it in too far - it comes out again without much trouble, but maybe yours is jamming too? If jiggling it doesn't make it align properly you might try some oil...

 

[Zak Da Mack]

That does look dodgy. It looks like the spring that holds the latch isn't working properly, but that said, my spring feels fine but nonetheless it is possible to force the button to jam by pressing it in too far - it comes out again without much trouble, but maybe yours is jamming too? If jiggling it doesn't make it align properly you might try some oil...

I can't get the button to jam in, nor can I push the latch further in so it looks like the spring is fine, but to me, it looks like the stock is not getting enough grip on the latch to stay properly.

 

[Ian_Gere]

I can't get the button to jam in, nor can I push the latch further in so it looks like the spring is fine, but to me, it looks like the stock is not getting enough grip on the latch to stay properly.

Yeah, that sounds like a good diagnosis. Dismantling seems to be the only way forward... On mine, when the stock is unlatched, the bit of the catch which sticks through the receiver on the right hand side is almost flush. On yours it seems to stick out a bit and at an angle. The only way i can imagine that happening is if it is either damaged inside, or the spring is not fitted properly.

 

[Majestic_SupportGunner]

Does anyone know where to get hold one of these from a UK supplier, don’t really fancy chancing ordering one from china

 

[Sacarathe]

Welcome to the forum!

https://www.google.co.uk/search?hl=en-GB&biw=1425&bih=747&tbs=sbi:AMhZZiu2XYLHzohRrwua8vECfNyFMZg-Tnhsbv4pH056j-xg3jISPoAIBcBitAU2k85bkjlL7s8rTlSandFMI_11FQSrGjI1MZvRNitt3tFmAdjLEH8G5lRXDeJKxaGOQwzRJ4m0_1LGHU65U4pw5CZyUS8sEGy_1tzfdHUYd5IcEgvyeQKnE0_1UqUTe4fW1kmSHz8OXvdfYNTXCaFupGa-AeLWpUyImyo_1q2HmUdEeCRU0-zMEEYpJc5pDiL0fdRMZIHJMxkSaOsHKdFY8QTFYzJIq9HR1icFpUEm3gGOWbW1QeGyxjaxYdgEITbY9lyUffdMWdIwM9SfTJgUCBdg8FUshDSkS9MQj_1JxFATgGyKrncFgVb70rhjcru2ZB8SgPeoV6nrWPoFampAcHKQ1OGK3ec7JOTVx3C3kcJmJ810OqOQsSVK7w_1NW-CN_1C9qIj9r5Glv9z7JfADvRrlSL37JnYN2J8DDDh7L7Ofii3ixz8JrtRg-54uszoJRolFrzTkdGS-z4Kqn-hpzzTFoz9Ddr_1ozcfLxazrKEUuYH2B_1fPyc8wNCV88465D-TfKa0pMwjGr0-krsN31Xob0hT765KPsCvXkj3zh3Avb7LBvPkggWzhqYMNp_1bi4laKKMYH1nANZQ3EB8tiDyyS4r4mlgUCbsYQeHy5mJ0vTtfZw074_1uvDeQOFR6YFn42ZQYJuzPxqlHHFhq2SAomo38hepEp-o6s4iyTe8OHgfpScrdGXTBlRwYMIYmbT_1Fsscsw1vMLzxvc7oluED4-CTqoONnYLKkWdUxoVbhka5jIZs0kgvgPThZK9rPkR14Pgv4_1hdO-rAnkRHkQqP3yrQgl1VE1Ckj5oeTJtgVmuDVzAtY0lQ-mjQteqdnPjJU13Rb7v4cih8_1vdaHquOkPqSfVNNl5B2hvg1VpNaLmP6hyMJGoirxjHrZc9U4K3qd7HAaYHLhDxE9XNA1e_1S9f_1LahKsslnnhjQC-5-0y2BGF1QK2SqrEeZSIsBbDxToG8X7Nck0tdf3N-XCg-Zyrs36C76Vr1CmWgFNCh-l7tnACja5CkvAjsfaH-aPIvM6nODwJTxMbhNEcdOloUqegW72Rs9XBRHgdI9AYQ8fTpSumL90ujBCXz9cGDzb1EN08wX9TsIVa_125J0rc02jMhSj5Ry0YVOEcYekw_1D7faYBJOLRJuNOsp9kW8pdnn1Eqeh22MitZesKACDtVANGRoLgEOBnl9AHmpqTUyKC4g7YacApzHIPXcpiQ3ioTKKMMWiABGDK_1nH2OQgc825Y-bghP571gwl2ymdNeq-b_1NgFc_1ZZ9aydQGZowOlJO-ZvUC_1vjPC5neGH32tZQsYdJxIFWkv1SekY390lmAzfVsAgAmPmSRiTQ-XNe7lum4K_1HhBcfPsLjXEdiPCqjAhmOaCt2iYXp-Rtaa084k5gj98QsbbbBnZXSWxtBOXShM1-omFrsIlLobnBSZhUY0PwixyoU5-eLeVRvRpB1ZKeWL7rIjZTLsMqjbMKxJ643Sj-tPf-ZyiBJmghFbF690BIre_1O0irV-Ic6FLVFQ01-i_1bdo7qFbG2p09gJaMkcZ3I&ei=jYYjVqPOE4iHaPbVuugN&start=0&sa=N

First hit on google. If still stuck click here.

 

[Majestic_SupportGunner]

You sir are a lifesaver! Thanks!

 

[djben9]

Does anyone know where to get hold one of these from a UK supplier, don’t really fancy chancing ordering one from china

I got a multicam one from AIrsoft Peak, took about 2 weeks to get here no problem, kinda fitted it to my Fma helmet but prefer the mesh mask instead....if it wasn't for that, I'd have lost a tooth yesterday!

 

[djben9]

So got my CXP-UK1 yesterday... Test fired before game and bbs dribbled out end, guy there helped with it, did this later during first game again guy at UA helped with hop, which I was told would be set up before delivery and it worked well rest if day, so retry happy...just want more range!!!

(red bit ) so should I tweak it now at home and play with hop

And to help with range, new barrel and see how I get on?

Still new to this so may have written rubbish!