Mack
Members
- Jun 24, 2012
- 1,155
- 1,030
If you import something from outside the EU, you have to pay customs duty on top of what you have already paid, most likely will have to pay a handling fee aswell to the courier.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Quick Questions & Simple Answers.
- Thread starter Finius
- Start date
- Oct 20, 2012
- 5,103
- 1,671
Edits after fact checking:
KS is allegedly a rebrand of JG (who in turn have many of their parts used by other manufacturers manufacturers - most notably Echo 1).
So the answer is that they have no website as they're not strictly a manufacturer. Look up JG if you want to see their products.
KS is allegedly a rebrand of JG (who in turn have many of their parts used by other manufacturers manufacturers - most notably Echo 1).
So the answer is that they have no website as they're not strictly a manufacturer. Look up JG if you want to see their products.
Last edited by a moderator:
- Oct 20, 2012
- 5,103
- 1,671
The TM G18c is known to be about 1mm thicker than its clones and real steel counterpart.
Some people have reported being able to adjust many of the TM fibre sights to fit WE, so if you have a set of files then I'd say it's fair game.
Some people have reported being able to adjust many of the TM fibre sights to fit WE, so if you have a set of files then I'd say it's fair game.
Last edited by a moderator:
I was aware of the Echo 1 connection, but not of the JG connection - I'm planning to spend £220 on KS, do you have any info on what differentiates the KS from the original JG?
Thanks for this answer, looks like my first AEG will be JG.
Last edited by a moderator:
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
Nowt wrong with JG as a budget AEG manufacturer, but £220 sounds a bit strong. Specifically I'd look into replacing the hop rubber.
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
The Madbull TBB's are made in a 2 stage process which uses a coating to fill in the imperfections in the inner surface created during manufacture of the aluminium tube. Initially then it probably is a better choice for accuracy than the Lonex. However being a coating it is more susceptible to wear from use and cleaning than stainless steel. As a general plan then I'd say the Lonex for a gun you anticipate using on full-auto often and the Madbull for a gun you plan to use on semi-auto/single shot.
Adam3088
Members
- Jan 28, 2014
- 391
- 222
Adam3088
Members
- Jan 28, 2014
- 391
- 222
Annoyingly I couldn't get a lonex or madbull in the right size...thought a 300mm would be OK but after measuring I ended up needing a 275mm, so got a zci 6.02 steel barrel from ak2m4.
It's for my scar, not actually upgrading it just reducing it down to cqc length, although as WE gearboxes are a bit 'meh' I might end up upgrading it properly at some point.
Ian_Gere
Retired Moderator
- Apr 1, 2012
- 6,417
- 2,050
^^I'd be interested to hear how that works out. I've had good results from a Guarder chromed brass 6.02mm TBB of about the same length, even on full-auto and occasionally using BB King ammo. Bear in mind that your FPS will jump by approx +30 (going from 6.08 to 6.03mm adds about 30FPS from barrel lengths of around 430-550mm, so the slightly tighter barrel should give about the same even though it is shorter). So you may have to visit your spring to keep within your site's limits.
Adam3088
Members
- Jan 28, 2014
- 391
- 222
Installed the ZCI barrel, impressed with the quality so far. End is well crowned and has an indented o-ring to help stabilize it.
Not sure about fps precisely as I've not got my own chrono but visually I'd not say there's been much of a difference, think the shorter length has pretty much counteracted the tight bore.
Not sure about fps precisely as I've not got my own chrono but visually I'd not say there's been much of a difference, think the shorter length has pretty much counteracted the tight bore.
ShadowSniper
Members
- May 29, 2015
- 53
- 14
Don't hate but is it legal to paint a two tone gun without a ukara?
And how do you make red?
And how do you make red?
Last edited by a moderator:
Mack
Members
- Jun 24, 2012
- 1,155
- 1,030
It is Legal, as long as you can prove your an Airsofter/Reenactor/Film studio
UKARA is only one way of providing a defense, there are many others.
Last edited by a moderator:
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
ehhh - it is one of the primary colours
All of us now & I'm telling
soz very bored n tired best get some kip
Last edited by a moderator:
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
The law states that its legal to own a RIF for the purpose of playing airsoft.Technically you can own one without ever actually playing as long as you have it with the intention of using it for playing airsoft one day.
The whole VCRA and UKARA thing is totally misunderstood.
Airsoft_Mr B
Members
- Jul 14, 2013
- 1,794
- 612
You could search 'airsoft skipton' and summut should come up mate.
Cerberus Airsoft and First & Only should have some near you.
Sorry I can't change colour im on el fone
Cerberus Airsoft and First & Only should have some near you.
Sorry I can't change colour im on el fone
Similar threads
