Quick Questions & Simple Answers.

[Prisce]

Quick question.

Can a magazine release catch be the cause of misfeeding/not feeding at all/air leaks?

I have 2 Ares Amoeba M4s, same exact lower receivers, used to feed flawlessly every mag i could throw at them.

Not long ago i lost my whole mag release assembly on one and purchased an aftermarket ambidextrous mag release thingy.

Since then, said gun has had troubles feeding from midcaps, while the other still feeds fine.

I purchased one of those ambidextrous mag releases for our Firehawk and it did the exact same thing. I replaced the original stock part and it’s back to working perfectly.

 

[Skara]

I purchased one of those ambidextrous mag releases for our Firehawk and it did the exact same thing. I replaced the original stock part and it’s back to working perfectly.

Cool, ordering a new Ares mag release assembly tomorrow

Cheers ?

 

[Samurai]

Can a magazine release catch be the cause of misfeeding/not feeding at all/air leaks?

Yes. M4s are very prone to misfeed due to even a slight change in the mag's position.

 

[Asomodai]

My new Well MB09 came with this random spring. Nothing in the poor instructions as to what it is supposed to do. RIF works fine without it. Any ideas?

View attachment 42339

View attachment 42340

 

[Guest]

Looks like the spring from inside a nozzle

 

[Resistor170]

What is the purpose of the flip up trigger guard on the sig 552? About 3.15mins in the video if that helps. (sorry can't figure out how to type in red) 

 

[ImTriggerHappy]

6 minutes ago, Resistor170 said:

What is the purpose of the flip up trigger guard on the sig 552? About 3.15mins in the video if that helps. (sorry can't figure out how to type in red) 

It is for when you are wearing heavy gloves. You can flip it to one side so you have more room.

 

[Resistor170]

It is for when you are wearing heavy gloves. You can flip it to one side so you have more room.

Smart. It would just be drilled into you to flip back I suppose

 

[Asomodai]

Looks like the spring from inside a nozzle

Its been confirmed on Facebook as a spare mag release spring. It seems that Well always provide a spare for some reason! Odd but can't knock it!

 

[emilianoksa]

What do people mean when they refer to "normal" or "regular" green gas.

I know they don't include Nuprol 2.0 in that category since it is supposed to have a somewhat higher pressure than most green gas.

There doesn't seem to be a lot of choice in green gas in the UK. Most places sell only Nuprol, Abbey and ASG Ultrair,  though you will occasionally see Guarder, Airsoft Surgeon or Puff Dino. I have no idea where the Puff Dino fits into the spectrum.

I'm guessing something like Abbey Predator Ultra might be regarded as normal green gas.

 

[Asomodai]

What do people mean when they refer to "normal" or "regular" green gas.

I know they don't include Nuprol 2.0 in that category since it is supposed to have a somewhat higher pressure than most green gas.

There doesn't seem to be a lot of choice in green gas in the UK. Most places sell only Nuprol, Abbey and ASG Ultrair,  though you will occasionally see Guarder, Airsoft Surgeon or Puff Dino. I have no idea where the Puff Dino fits into the spectrum.

I'm guessing something like Abbey Predator Ultra might be regarded as normal green gas.

Nuprol 1.0 and Abbey 144a (confusingly with a green label) is duster gas.

ASG Ultraair is somewhere between duster and green so I use it in my TM pistols when its below 12 degrees.

Abbey Red label, Nuprol 2.0 is green gas. 

 

[emilianoksa]

Thanks.

?

 

[emilianoksa]

Is there much point in running bbs heavier than 2.0 at cqb sites where the layout restricts range to about 20 yards maximum?

 

[Prisce]

Is there much point in running bbs heavier than 2.0 at cqb sites where the layout restricts range to about 20 yards maximum?

In my opinion, No.

 

[Guest]

Is there much point in running bbs heavier than 2.0 at cqb sites where the layout restricts range to about 20 yards maximum?

As long as they are good quality. I use 0.25’s in my pistol and 0.36’s in my rifle but pinpoint accuracy not body sized targets is important to me 

 

[emilianoksa]

Thanks. I was considering  getting some .25 tracers but 20s would probably suffice.

 

[tasum]

Can anyone recommend a light bearing holster for a sig F226 e2?

I have one from nuprol for my glock, but I understand they don't do one for the sig

 

[emilianoksa]

Blackhawk do a universal light bearing one called the Omnivore.

https://blackhawk.com/omnivore

It is designed for Surefire or Streamlight torches only. I suppose clones of these are available.

Worth checking that your P226 will fit a real steel holster. If it is WE or KJW I don't think it will.

Other than that you could try Fobus. You might be able to squeeze it into one of their light bearing holsters with strap retention.

https://www.ebay.co.uk/itm/201055051084

 

[Musica]

Probably a stupid question but are all speed loaders pretty much the same? 

Need to budget for 1 to load mid caps/pistols.

 

[clumpyedge]

Probably a stupid question but are all speed loaders pretty much the same? 

Need to budget for 1 to load mid caps/pistols.

Bar the capacity of the speed loader yes, although some will come with gas type mag adapters and some wont. Other speed loaders like the Odin need adapters for different magazines.