Mechanically locking my ics m4 to semi

[n1ckh]

As the title says

How would I go about locking my ics m4 temporarily to semi so I can use it as a DMR ??

I don't want to use a bells & whistles fet as I've installed one already, I'm sticking an m120 spring with a hi torque motor into using another upper gearbox so I can swap them out at a moment's notice

 

[Sacarathe]

Keeping safe?

 

[geoffreym]

little bit of solder or something to prevent the tappet plate from moving all the way back?

personally I like what fire-support (at least I think it was fire-support) where they drilled a small hole and threaded it for a tiny bolt which prevents going into full while the bolt was in.

 

[Sitting Duck]

Burst fet one of them plug in ones for quick fix

Lock burst to single shot perhaps ?

Actually might have one them crappy avacado burst bollox things around - small tamiya that might work

Ask around or have a Google n see if it might work

If so his a shout and maybe a fiver if it does the job in the end

 

[Sitting Duck]

As the title says

How would I go about locking my ics m4 temporarily to semi so I can use it as a DMR ??

I don't want to use a bells & whistles fet as I've installed one already, I'm sticking an m120 spring with a hi torque motor into using another upper gearbox so I can swap them out at a moment's notice

Wait you got a bells n whistle fet already ??

Then if its programmable then set it to one shot burst

 

[n1ckh]

I like the idea of the bolt job to restrict the selector plate

Cheers for the offer duck, I'll look around & get back to you mate

 

[n1ckh]

Wait you got a bells n whistle fet already ??

Then if its programmable then set it to one shot burst

My bad duck, as usual my brains worked than faster than my hands, I've got a basic mosfet permanently installed

 

[Sitting Duck]

Have a butcher's around, somewhere I saw on some Philippines airsoft site about the avacado burst

Either it worked with a basic 3034

or

It didn't -lol

Yeah I know that helps a lot but saw something but can't for life of me was it a yey or ney outcome

Think the burst stuff was something to do with a Philippines guy programmer.

No I wasn't look for a new bride or odd lady boy site

But something about a Philippines AIRSOFT site n burst wizards

If you end up on a totally different site do not blame moi

 

[Okto Eight Milsim]

A DMR has a 30m minimum engagement distance in our games, so you might struggle to use it to any effect in the dense jungle of Eversley. Its coniferous so still dense even in December.

 

[Rock-climby-Dave]

on your selector plate, take off another 5mm or so to prevent the cut off lever being lifted up when it's set to auto. Easiest and most permanent way to lock to semi.