I am curious to know if I can assemble several 3.7v 18650 ex-laptop batteries into an 11.1v power pack for an AEG? Is it as simple as, perhaps, shrink-wrapping them into a stick with + and - terminals ending in an appropriate connector? I'll bet it isn't. There are bound to be complications about amperage or discharge rates!
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Making a Battery Pack
- Thread starter Old Guy
- Start date
Samurai
Supporters
- Mar 7, 2014
- 2,291
- 698
It's that simple, but they have low discharge rates, so use it with light loads: no high torque or speed motors, not too strong spring, etc.
Also, soldering them into a stick is very tricky, especially if they don't have soldering tabs on them. Or should I say super hard without some proper equipment as solder wont flow on their ends as you would've expected and heating it for more than a second or so will damage the battery.
Also, soldering them into a stick is very tricky, especially if they don't have soldering tabs on them. Or should I say super hard without some proper equipment as solder wont flow on their ends as you would've expected and heating it for more than a second or so will damage the battery.
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
there's also the issue of wiring up a balance plug.
better off just getting a dedicated pack.
better off just getting a dedicated pack.
Ad_
Members
- Apr 16, 2020
- 112
- 16
The type of chemistry typically used in 18650 cells (and especially the kind normally used in laptops) is unsuitable for providing the kind of current an AEG requires. Mix that in with cells likely being in varying states of wear due to previous use further limiting how much max current they can put out & their effective capacity... doing this would be asking for disaster.
- Thread starter
- #5
Right, that's a big 'don't bother' for this idea. Thank you Airsofters, this is all new and purely theoretical for me as I don't yet even own a rifle BUT I expect to receive one by mid-week. Bought from a forum member at a very reasonable price for an 'as new' M4 style Cyma I expect to have a new obsession very soon. Let the games begin!
D
DrAlexanderTobacco
Guest
Component Shop will also make custom batteries for you if you can't find one that suits your needs, such a good shop and miles above the rest, Hobbyking etc.
