LCT SVD teaser vid
- Thread starter rj1986
- Start date
Nice looking piece of kit. Curious as to what price tag these end up going for?
Real Sword seems to be a thing of the past, whilst E&L's offering seemed to be vapourware.
Should do well if it's a decent performer. Will fill the Dragunov niche for a good few players.
Real Sword seems to be a thing of the past, whilst E&L's offering seemed to be vapourware.
Should do well if it's a decent performer. Will fill the Dragunov niche for a good few players.
strykerles
Members
- Jun 15, 2019
- 753
- 306
being LCT probably around the £500 mark
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,230
be good to have something to sit between the cyma and RS options.
not counting the WE sitting off to one side that is.
not counting the WE sitting off to one side that is.
It will be interesting to see what price they decided for this? The past build up for the lct svd, people on social media seem to be thinking £450-500 mark but I am personal thinking it will be more, possibly looking at a similar price to that of the Limited Special Edition lct type 3 AK47 £650.
Last edited by a moderator:
Seems like it would be about that. Taking Fire support prices, the GS SG1 is about 500 while the AK47 is about 650. So in the interest of speculation will predict £600 myself. Off course could be off and it might be closer to their RPD in price.
Will be curious as to what the internals look like? Probably close to the Real sword or Cyma.
Last edited by a moderator:
strykerles
Members
- Jun 15, 2019
- 753
- 306
hopefully better than the cyma with the 4 gears in the box, nightmare to work on
That is an interesting point, while I believe it would limit the market if they put it a rpd or pkp prices, they could very well do that since they are currently the only large airsoft manufacture making a genuine milled steel svd and possibly other variants looking at the box.
Especially since Real Sword has not re-done a rerelease of their gen2 SVD.
Seems to be scheduled for release at the very end of the year. Imagine it will be about February before it shows up in Europe.
Looking forward to the reviews.
Also seems to be using the RS four gear set up.
View attachment 82523
View attachment 82526
Looking forward to the reviews.
Also seems to be using the RS four gear set up.
View attachment 82523
View attachment 82526
Last edited by a moderator:
Have LCT give a price estimate yet?
Also that QC gear box looks very interesting.
Last edited by a moderator:
EvilMonkee
Members
- Feb 17, 2014
- 2,363
- 1,359
Ah the standard LCT tappet plate that is made of cheese......
No news on that front. Imagine that it will show up on the preorder section of WGC shop shortly. They seem to get LCT's offerings fairly early. Speaking of which, WGC have the VFC MK48 for preorder at £875. Just in case any members have money to burn and masochistic tendencies...
I wonder if LCT will produce their own optic like the one shown in the AD?
Don't recall them having any optic for sale in the past. Imagine we are left with Vector optics and Belarusian for the cheaper options. Then Russian glass for the more expensive offerings. Think Real Sword's PSO-esque scope supplies have dried up.
Perhaps if sales are good, new scopes will come onto the market.
Perhaps if sales are good, new scopes will come onto the market.
You are correct, LCT have never produced their own optics yet. However they did have have an advert back in 2016 which showed LCT AKs with a number of accessories, which of course, lead to speculation that LCT may produce their own.
Here is a page with said advert https://popularairsoft.com/news/all-lct-airsoft-ak-parts-accessories
Here is a page with said advert https://popularairsoft.com/news/all-lct-airsoft-ak-parts-accessories
Last edited by a moderator:
Seen a preorder on a Taiwan based site. £775 for the wood version and £720 for the polymer. Going to be a pricey one.
Link for those interested:
https://www.proactstore.com/products/lct-svd-aeg-wood
Interesting I imagine UK price are going to be quite high, especially with noprol I believe being the exclusive UK distribution agent, and they add their tax on top of the RRP.
Fair point as regards the Nuprol factor. Imagine the price will breech the £800 mark by the type they get their cut.
strykerles
Members
- Jun 15, 2019
- 753
- 306
those gearboxes can be a pain to work on if the cyma one is anything to go by
if it's the same as the cyma then it uses a 19 tooth piston with half teeth, 2.5 cylinder, m14esque cylinder head (m14 head can't be used) and an elongated tappet plate
getting spares is a nightmare
also that looks like it has a slim motor ?
if it's the same as the cyma then it uses a 19 tooth piston with half teeth, 2.5 cylinder, m14esque cylinder head (m14 head can't be used) and an elongated tappet plate
getting spares is a nightmare
also that looks like it has a slim motor ?
