-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
JG SL8 info
- Thread starter AIRMIKE
- Start date
Airsoft_Mr B
Members
- Jul 14, 2013
- 1,794
- 612
Yes they will. I'm pretty sure all JG guns are TM clones so most manufacturers magazines should fit I'd guess.
Airsoft_Mr B
Members
- Jul 14, 2013
- 1,794
- 612
Cheap on TaiwanGun too but I've heard bad things about customs 
Unrustle_Thine_Jimmies
Members
- Mar 3, 2013
- 1,074
- 424
If the SL8s are anything like the G36s,there have been some changes made by JG which are very dummyheaded.
-JG decided to cut costs and install Nylon bushings. In a gun pushing 400FPS OOTB with an M130 spring this is really bad for long term reliability. Replace with steel bushings or bearings. Even with a 1J spring required by our laws I'd still replace them. The gearbox is too high stress for nylon bushings.
-New proprietary hop up unit. It's terrible. To replace it you must replace the magwell which is thankfully still in Marui spec.
-Usual recommendation of re shimming, re greasing and aoe correction because JG don;t pay their QC department.
Overall should be the same JG stuff, super strong gearbox easily on G&G top tech levels with poor acm hop up.
-JG decided to cut costs and install Nylon bushings. In a gun pushing 400FPS OOTB with an M130 spring this is really bad for long term reliability. Replace with steel bushings or bearings. Even with a 1J spring required by our laws I'd still replace them. The gearbox is too high stress for nylon bushings.
-New proprietary hop up unit. It's terrible. To replace it you must replace the magwell which is thankfully still in Marui spec.
-Usual recommendation of re shimming, re greasing and aoe correction because JG don;t pay their QC department.
Overall should be the same JG stuff, super strong gearbox easily on G&G top tech levels with poor acm hop up.
- Thread starter
- #7
Mr b i have bought many bits and guns from taiwan gun with no custom charges at all they are so gd.
Jimmies thats some gd info, till i saw your post i generally thought they were a gd gun but thanks for that insight.
I havent bought one yet as im still trying to sell my ak.
Jimmies thats some gd info, till i saw your post i generally thought they were a gd gun but thanks for that insight.
I havent bought one yet as im still trying to sell my ak.
Similar threads
