I could cry

[Jack Reacher]

I don't bloomin believe got my battery charged bought some bbs & would you believe it the mag that came with my aeg is knackered ,won't feed .cheers jack

 

[Spatch]

That's very odd for a real sword, ensure the hop is off and not fully on which may stop it feeding, I take it you have a hi cap supplied with it, make sure the rounds are free to feed as they are often full of oil which can stop it too

 

[Samurai]

Is it a hi-cap? If you pull the small thing that holds the BBs in, does it spit the BBs in your eyes?

 

[Jack Reacher]

Spatch it did work partially at first but just won't feed properly ,I have to keep turning gun upside down them fires a few & stops ,I take mag off & a few bbs fall out .Spoke to techy at land warrior who reckons it's the mag .I haven't touched the hop up but it is all the way foreward to my right as o look at it.Shame because it's shooting like a dream when it does fire .cheers jack

 

[Jack Reacher]

No it doesn't samurai.cheers jack

 

[Jack Reacher]

They just sit there .cheers jack

 

[Samurai]

If it's a hi-cap, wind it up some more. And more.

 

[Jack Reacher]

It high cap & the problem seems to be intermittent,,far to much winding up needed & one that works & the next it don't .By the way I do know you need to keep winding them up but this is some other Prob ,but it is the mag

 

[Mack]

What bb's are you using? I used to have different mags that just refused to fire certain brands (usually bios)

 

[Jack Reacher]

Devil blasters.25s ,one minute it works fine then just starts playing up again ,when it's good it's really good & then it just throws a wobley.Its windi ding me up ?cheers Jack

 

[RR01]

It sounds like the inner part of the mag spring has broken off, allowing the spring to only partially wind until the inner slips around and unwinds the spring in one quick burst. If the mag is new, send it back to the retailer to sort and in the meantime, try to borrow one from someone to confirm that there is nothing wrong with the gun itself. Alternatively, if you feel like repairing it yourself, hicap mags are fairly simple to strip and a new spring is quite a cheap fix.

 

[Jack Reacher]

RR01 I think your right ,I shall be sending it back but what a pain ,the gun itself is fine as far as I can tell .if I turn it upside down it feeds .Ive learnt two things though rs mags aren't as good as there cracked up to be & hi mags are a pain to keep winding.Cheers jack

 

[Jack Reacher]

Allso a couple of time when putting the mag in I heard unwind.cheers Marcus

 

[n1ckh]

The mag unwinds when there's not enough ammo in the mag

You could get some mid caps from eBay, Taiwan gun or from China in packs of 5 or 10

 

[Jack Reacher]

These wad full but it's definitely something to do with a spring of some kind & I'll look into those mid caps.cheers jack

 

[ikarma70]

I had mid caps with my RS 56 and they keep up with my gun on 2 7.4v lipo batteries.

Very surprised to hear about this from RS as their gear is normally top grade.

If you was local to me you could try my mid caps with pleasure!

 

[Jack Reacher]

Got my mag back & sorted & now I can enjoy my type56-2.cheers jack