Help with nozzle size

steverebo

steverebo

Members
Joined
Dec 16, 2021
Messages
222
Reaction score
43
So I destroyed my hop chamber by forcing a mag in and now I'm getting missfeeds so I am replacing my hop chamber and while at it the nozzle as its been giving me compression issues anyway.

I was going to grab a zci cnc hop chamber and a new zci nozzle but unsure of the size I need

I have a specna arms sa-07 edge with zci advanced 13:1 gears zci lightweight piston and double oring piston head powered by a zci high torque motor and an upgraded 297mm zci 6.02 barrel

 
Err..measure the existing one?

Alternatively, if you want to take a punt, it is an M4, so a standard 21.4mm M4 nozzle should do the trick.
 

 
I didn't measure because from what I was told the nozzle length is directly linked to the hop chamber and I'm replacing the hop chamber and zci have 2 different length nozzles.

I will give the 21.4 a go and see if I have any issues

 
steverebo said:
I didn't measure because from what I was told the nozzle length is directly linked to the hop chamber and I'm replacing the hop chamber and zci have 2 different length nozzles.

I will give the 21.4 a go and see if I have any issues
Click to expand...
Click to shrink...


I wouldn't say nozzle length is directly linked to the hop chamber.  It's more of a combination of many parts, tappet plate, gearbox shell, bucking, outer barrel etc.  

 
@steverebo always good to keep in mind that there's so many factors involved nothing is ever 100% guaranteed to fit or work straight away.  Exactly the same with these ZCI plastic chambers.  They are however cheap.  If you purchased from me let me know, I've got some sample zci adjustable nozzles around somewhere, I'll drop one in for you for free ?  might help you diagnose any issues.

 
ak2m4 said:
@steverebo always good to keep in mind that there's so many factors involved nothing is ever 100% guaranteed to fit or work straight away.  Exactly the same with these ZCI plastic chambers.  They are however cheap.  If you purchased from me let me know, I've got some sample zci adjustable nozzles around somewhere, I'll drop one in for you for free ?  might help you diagnose any issues.
Click to expand...
Click to shrink...
Unfortunately you have already shipped my order, I think my entire gearbox has been built with parts from your store ? 

 
@steverebo you're a superstar, thanks.  Hopefully the chamber will work out well for you.  I'm always over-cautious when it comes to anything related to feeding and hop chambers.  It's just such a minefield sometimes.   Let us know how you get on.

 
ak2m4 said:
@steverebo you're a superstar, thanks.  Hopefully the chamber will work out well for you.  I'm always over-cautious when it comes to anything related to feeding and hop chambers.  It's just such a minefield sometimes.   Let us know how you get on.
Click to expand...
Click to shrink...
Just measured my nozzel and its 21.37mm so would a 21.4mm double o'ring rocket nozzle be OK? 

 
You must log in or register to reply here.
Back
Top