CharlieW06
Members
- Aug 9, 2019
- 2
- 0
Hi all,
Just finished on a G&G CM16 raider L. All I've changed from stock is:
G&G metal tooth piston
SHS piston head
bearing spring guide
The beefier G&G ifrit motor
16awg wire
A simple MOSFET circuit I made
ZCI Air nozzle
ZCI Cylinder
I corrected AOE (or so I thought) and Swiss cheesed the piston. Third tooth is shaved to avoid interference and I shimmed using bevel to pinion. I put in a fresh 7.4V LiPo and semi shoots fine. Auto works great when there are no BBs loaded. When I put in a mag on full auto, occasionally, it would make a crunch noise like what I would expect PME to sound like, but I have no idea if that's what it is.
If I switch to semi and shoot, the BB comes out but always at a low velocity.
Does anyone have any ideas for what to do?
Thanks,
Charlie
Just finished on a G&G CM16 raider L. All I've changed from stock is:
G&G metal tooth piston
SHS piston head
bearing spring guide
The beefier G&G ifrit motor
16awg wire
A simple MOSFET circuit I made
ZCI Air nozzle
ZCI Cylinder
I corrected AOE (or so I thought) and Swiss cheesed the piston. Third tooth is shaved to avoid interference and I shimmed using bevel to pinion. I put in a fresh 7.4V LiPo and semi shoots fine. Auto works great when there are no BBs loaded. When I put in a mag on full auto, occasionally, it would make a crunch noise like what I would expect PME to sound like, but I have no idea if that's what it is.
If I switch to semi and shoot, the BB comes out but always at a low velocity.
Does anyone have any ideas for what to do?
Thanks,
Charlie
