MistakenMexican
Members
- Sep 27, 2020
- 427
- 437
This arrived on Christmas Eve. And as a result, I just got the chance to build it last night:
Guarder have produced a G45 based on the Marui system.
It looks fantastic and I think this might overtake my current gen5 as my main pistol.
There’s only a few niggles I’ve found with the pistol. The first one came as a surprise, but the rest seem fairly standard for guarder:
- the extended barrel doesn’t take an extended inner barrel. If you fit a barrel longer than 87mm, it causes the barrel to rub on the slide and jam.
- the guarder steel acro plate is too thick, so it presses on the nozzle, preventing it from returning properly. - fix is to stand down the top of the nozzle or use a different optic plate.
- the slide rails are too thin, so you need to sand down the paint off the sides of the forward rail and the hammer chassis.
Guarder have produced a G45 based on the Marui system.
It looks fantastic and I think this might overtake my current gen5 as my main pistol.
There’s only a few niggles I’ve found with the pistol. The first one came as a surprise, but the rest seem fairly standard for guarder:
- the extended barrel doesn’t take an extended inner barrel. If you fit a barrel longer than 87mm, it causes the barrel to rub on the slide and jam.
- the guarder steel acro plate is too thick, so it presses on the nozzle, preventing it from returning properly. - fix is to stand down the top of the nozzle or use a different optic plate.
- the slide rails are too thin, so you need to sand down the paint off the sides of the forward rail and the hammer chassis.
