Electronics issue

[Kalawan]

Ok, I'll try my best to explain this :/

I have a snow wolf m82 Barrett, and it rocks. The issue is, because of the full auto feature and the lovely trigger spam on single shot, my site has asked I mod it so that it can only do single shot and with a trigger delay of roughly 1-1.5 seconds.

My question is, how can I do this? Any and all information is helpful as I am completely stuck here. I've seen the words MOSFET floating around, among others. Links etc would really help too, thanks

Kalawan ><

 

[AirsoftTed]

http://www.zerooneairsoft.com/product_info.php?cPath=278_477&products_id=6928

Plug and play mosfet, plug one end into your gun and the other into your battery, saves you hard wiring a mosfet in.

That one in particular comes with a variety of burst settings, delays and other features; most importantly a sniper setting, allowing you to program a delay between each shot (will tell you how to do it in the manual, mine did but I cant remember where I put it)

Also, if you're into realism you can program a reload feature where after firing a certain amount of shots, say 30, your gun will not fire for 4-5 seconds allowing you to use a highcap and simulate reloads.

 

[Lozart]

http://www.zerooneairsoft.com/product_info.php?cPath=278_477&products_id=6928

Plug and play mosfet, plug one end into your gun and the other into your battery, saves you hard wiring a mosfet in.

That one in particular comes with a variety of burst settings, delays and other features; most importantly a sniper setting, allowing you to program a delay between each shot (will tell you how to do it in the manual, mine did but I cant remember where I put it)

Also, if you're into realism you can program a reload feature where after firing a certain amount of shots, say 30, your gun will not fire for 4-5 seconds allowing you to use a highcap and simulate reloads.

The guy that makes those is now ONLY making the latest version which is on his website: http://www.aegwizard.com/ The new one is the King Kong Super 2 and there is one about to go into my M249! It will indeed do "sniper mode" which will do exactly what your site is asking. If you're up to a bit of soldering you can also hardwire the mosfet to the trigger contact which will greatly improve the trigger response.

 

[Kalawan]

This is exactly what I want, but there out if stock I've done done searches but can find anywhere else in the UK that sells them. Any ideas?

Thanks guys!

Kalawan,

 

[Lozart]

This is exactly what I want, but there out if stock I've done done searches but can find anywhere else in the UK that sells them. Any ideas?

Thanks guys!

Kalawan,

I bought mine direct from the aegwizard site and it was no problem. Turned up inside a week and was posted as a gift with a $3 customs value so no import duty or VAT to pay! Buy it direct. Easy.

 

[Kalawan]

I need it by Sunday ideally, I'm wondering if it would come in that time? I don't usually order overseas so I don't know the standard times.

 

[Lozart]

I need it by Sunday ideally, I'm wondering if it would come in that time? I don't usually order overseas so I don't know the standard times.

It's coming from the US by standard airmail, 7-10 days depending on this end. Mine came quicker but you're too late for Sunday. I think you'll struggle to order anything now...

 

[Kalawan]

Damn these useless uk sites! Why is everything always out if stock!!!

Alright cheers for the help guys, at least I know what I need now!