Compatible SR25 VFC (GBB) pistol grips

[davidf]

Anyone know which pistol grips are compatible with the SR25 VFC (GBB) platform? 

I did test a spare MOE+ grip but its shaping was way off. 

Looking for something that is just more comfortable that the stock grip it has. 

Thanks all

 

[Lozart]

I'd say Ergo grips because I just like them. Search for AR 308 grips and you should get the righ kind of profile. https://www.brownells.co.uk/epages/UK.sf/en_GB/?ViewAction=ViewFaceted&ObjectID=14584&FacetValue_PreDefString_en_2390542=AR+.308&CurrencyID=GBP

 

[davidf]

Thanks for the response @Lozart

I assume that means this would work nicely?
https://www.brownells.co.uk/ERGO-GRIPS-AR-15-AR308-FLAT-TOP-SUREGRIP-AMBI-BLACK-Polymer-AR-308-AR-15-430104876

Thanks

 

[Lozart]

I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.

 

[davidf]

I see no reason why not. I assumed you were having a problem with the beavertail not fitting the curve at the back of the receiver. If you use a grip without a beavertail then it should be a non issue.

Click to shrink...

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

 

[Lozart]

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

Click to shrink...

I believe the AR308 version with the beavertail should fit (YMMV of course, airsoft tolerances being what they are).

 

[Shaydee]

I was indeed. Also the grip had a whole in for the selector spring but in the original grip there are no holes. 

Click to shrink...

Any real steel grip you buy will have a hole for the selector spring, VFC grips don't have the hole. You'll need to either plug the hole in the grip or use a real steel spring/detent. You can also use wolverine MTW detent kit as they're properly sized up, though if you are buying from brownells you should be able to get a spring and detent from there.

Just to add, if you do use an MTW/real spring and detent the selector will feel a lot more crisp.