Cellphone IED Project

[200rabbits]

Ok, so we throw plenty of MK5s around the place, but their range and accuracy is only as good as we can throw them, the fuses are a tiny bit unpredictable, and the enemy know when you use them.

But there's a weapon that terrorises NATO forces, and has been responsible for more British deaths than guns have recently. The IED.

So I thought, why not build an airsoft IED? People use claymores and mines with fancy CO2 noise generating systems, and BB, water and talcum powder launchers, but could it be done more simply?

I've come up with a £20 design, using a cellphone detonator from Youtube/Google and the Spectum Maroons sold by Land Warrior

Design removed

Maroon MK5 details:

Like a standard MK5, without a time fuse and with two wires coming out. To my knowledge, it makes no difference which way round they're connected. Designed to be set off by some special detonators that were made (but are severely lacking in cool factor and cost a lot more than a Nokia 3310), or by a 9V battery. In tests, the maroons exploded the instant the battery was touched to the wires with a rather satisfactory bang.

Disclaimer - I'm a student and an airsofter, not a terrorist. I promise. You'll find me at Phoenix Airsoft games at least once a month, up till now, using AK74 variants and wearing a black molle vest and a desert camelbak somewhere. Plus, I wouldn't give up bacon for the world.

I have the greatest respect for soldiers etc, and have no desire, and have never desired, to do anything other than play airsoft. Well... you know what I mean there.

Post edited regarding certain comments about the law and terrorists etc. and since I don't want anyone nasty using my design for bad things. Not that it was a good design anyway, as usual, 't was overcomplicated.

 

[Liam Porter]

Pretty good idea! I've seen a video of using a mobile phone as a detonator before.. I think they took the case off the phone and used the vibrate instead of headphone wires. I'll try and find the video.

 

[BaggyPants]

If you are going to remote det pyro, make sure you have line of sight on it when you do. Letting the stuff off without being able to see that no one is close enough to get hurt could lead to very angry players.

 

[Liam Porter]

Here's the video; http://www.metacafe.com/watch/2358935/make...hone_detonator/

He has some pretty cool videos on there..

 

[Cam-the-airsoft-sniper]

Stop.

This is wrong on so many levels.

Is it really nesisary to take it this far, I mean surely you can do without it and use a normall one as it is just plain distrispecful to familes of people who may of been killed.

 

[200rabbits]

Pay £60-£80 to buy a big black box of a radio detonator? Instead of just building something with a battery and a £10 Nokia 3310? (and having some fun with basic electronics and a creative challenge at the same time)

And how is it disrespectful? How? Surely it's no more disrespectful than airsoft itself? Both are immitations of something real where people die, created for the purposes of having fun. If anything, building a little airsoft IED will educate people I use it on as to the effectiveness, danger, and fear factor of the real thing, and give them just a tiny hint as to what real soldiers have to go through. I'm not seriously selling this as educational material, I'm just saying, it's airsoft.

On the subject of Liam's vid, I did see that, but I lack the right kind of screwdriver to get into the right part of the phone. It seems I need one with some kind of strange head, shaped like a 6 pointed star with slightly rounded points, and a rounded dimple of a tip on the end. Does anyone know what kind of screwdriver this is, and where I can get one?

EDIT: with the Nokia, I examined the video, and took to it with a penknife. After 5 minutes of careful carving, there is now a hole the phone revealing the vibrator. Same problem still exists with the Motorola V220 however. Odd screws holding it all together, and this time, I don't have a video showing me how to cut through to the vibrator, if there is a vibrator that'll do the job. I will post pics about cutting through Nokia 3310s for other budding OPFORists later. You may be able to buy a more humorous alternative to a cellphone for a vibrator detonator from a certain shop in your local area, but they allow kids at my local site, so I'm not going out to buy one. No, not even buy one, before anyone gets and funny ideas

And don't worry about me burning peoples eyes out BaggyPants. The pipe's going to be designed so the explosion can only exit out one end, and it'll be placed with the position and direction of this end in mind, away from where prone, crouching and standing people's eyes are likely to be, and in full line of sight of me. And I definitely won't be handing out O2's free sim cards' numbers, or giving anybody else my phone. Plus, I'll be running it by my site before use, and keeping marshals in the loop.

 

[M_P]

We run around in woods with toy guns cam. It's no more offensive than that tbh

 

[Liam Porter]

For the 'funny' screws in the phones, I know what you mean but can't remember what they're called. I can normally use a small flat head screw driver on them though, if you put it in two of the star's points and have the middle of the head against the pin in the middle and be careful they should unscrew using it, although sometimes the pin will snap off. In which case, use a slightly larger flat head screw driver and put each end of the head in opposite points of the star, or you could use a regular Allen key, but I find it tends to round them off a bit.

I shall have to have a go at making one myself sometime.. would be nice to scare the sh*t out of my brother in the middle of the night.

You could also try one that runs on a timer that starts when you make the call, although that'd difficult.

 

[Finius]

Wrong on so many levels.

Not to mention the potential for getting arrested under terror charges...

You're making a device which will simulate a variety of equipment used in terror attacks and attrocities around the world, techniques taught by Al Qaeda, the IRA, ETA and all manner of other terrorist cells whom use it for evil.

No normal civilian could be seen as needing this expertise; you're essentially making something that could be adapted to blow up a building, people or anything, quite easily once you have the detonator. Knowing how alone is enough to get you arrested. Let alone documenting the procedure on a public forum and then stating you intend to use it.

It's so massively risky for you that I can't even be bothered to give you an explanation in full. Just don't do it. Make a remote detonator sure, but not using a cellphone...

 

[Liam Porter]

Maybe I won't have a go at making one myself.. I'll make a remote detonator one to use to scare my brother .

 

[200rabbits]

Seriously? This stuff's on Youtube though... And surely the argument that it can be adapted for anything once you have the detonator is true of any detonator? E.g. the ones marketed for the maroons? It's just a cellphone 9V switch when you boil it down. The dangerous bit is the Spectrum Maroon, which I'm guessing could be adapted the same way as a party popper could be?

It is a little worrying that this stuff is so easy to find on the internet, but terrorists will get it to their minions anyway. I think there's a tiny bit of paranoia in the law, then again, when I think about it, it makes more sense than the laws on 2 toning (though it hurts free speech more), but if it's the law then I'll abide by it, and not post any instructions or anything like that.

Actually, Finius' point is really good. Don't post designs and such on the internet people! There are real bad guys (granted it's just the amateurs that don't get given manuals) out there that would like to know how to build detonators and such like, and while it's fun to discuss and cool to think about, someone else (even if it is "just" rioters") could come up with a much worse use for your design, and hopefully that's the last thing you'd want.

If there's a law against discussing this, can we get this thread deleted so terrorists can't plagiarise my ideas and will have to

 

[Finius]

I think there's a tiny bit of paranoia in the law, but, if it's the law then I'll abide by it, and not post any instructions or anything like that.

Tiny? Really? You're going to go with tiny?

British counter terror law is ridiculous. Ever tried taking a hair comb with hard-plastic bristles onto a plane leaving Heathrow?

It's one of those touch and go things really, you have your right to free speech, and I'm not saying you're going to prison for it, because in essence, you're right, but by taking an interest, you're going to set off all the alarm signals as soon as some bobby trolling the internet for naughty people finds it all, and from that point, you can be arrested purely on a "just in case" basis.

I'd just not want to risk it for the sake of saving a few hundred quid (if you're anything like me, you're too pretty for prison life)....

 

[RR01]

For the 'funny' screws in the phones, I know what you mean but can't remember what they're called.

TORX bits

 

[200rabbits]

I'd just not want to risk it for the sake of saving a few hundred quid (if you're anything like me, you're too pretty for prison life)....

A few hundred quid should never be put in the same sentence as the word "just" :lol:

I like being able to go to the kebab shop whenever I like though, and I'm faaaar too picky an eater for prison.

Still gonna use Maroons in an inventive variety of ways at airsoft. Missed out on a triple kill on Saturday because I didn't have enough wire to get behind decent cover with my battery. But 40m for £12 on bitsbox? That's not happening again.

 

[Airsoft-Ed]

Haha, that triple kill miss was a shame, but you could have run for cover and sprinted back to the detonator afterwards, instead of sitting there and getting shot to pieces within the first 30 seconds of the game. There wasn't a hope in hell of a medic getting you xD

It was funny though.

 

[200rabbits]

I did go hide in the cover 2m behind the end of the wire. It was when I ran out that I got peppered. I was a half a second away from getting em too.

 

[Airsoft-Ed]

I think the screw driver you're after is called a hex key, bicycle shops will sell them.

 

[Wølf]

Hex key is the same as an allen key, the "star" head screws use torx bits.

 

[200rabbits]

I was gonna say, it's no ordinary hex key.

http://toolsreviews.net/wp-content/uploads...driver-bits.jpg

It is exactly like the one on the far right.

 

[Deva]

Far left is torx, far right is hex/allen.