- Oct 7, 2017
- 6,104
- 5,438
Are you both going for a working multiple shell grenade launcher (like the real thing) or a single shot mock-up ?
What have you just 3d printed (for airsoft)
- Thread starter sp00n
- Start date
mightyjebus
Members
- Dec 11, 2015
- 916
- 1,562
I need to shape the magazine spring and get the internals working and if that goes well I might start to replace parts with metal bits.
View attachment 155553
Lyndication
Members
- Nov 26, 2024
- 543
- 737
- Oct 7, 2017
- 6,104
- 5,438
Excuse my ignorance if im wrong, I haven't used 40mm gas shells for probably 20 years, but back then I remember they were quite temperamental, & prone to go off if not handled with "kid gloves", has that design issue improved enough to handle being racked in a pump system ?
Lyndication
Members
- Nov 26, 2024
- 543
- 737
Yeah they're pretty robust now. They have a latching valve in most models that needs a bit of force to trigger.
- Oct 7, 2017
- 6,104
- 5,438
PopRocket123
Members
- Dec 12, 2016
- 1,521
- 783
A piggy back mount for an Aimpoint Acro P2 for my SPR build. It's just a smidge too low as the elevation turret marginally blocks the view window but it's still usable
View attachment 155606
View attachment 155607
View attachment 155606
View attachment 155607
Has anyone tackled this project? I was wondering if anyone has done one and not used the S&T M203 as it seems they're discontinued.
https://cults3d.com/en/3d-model/game/gm-94-for-airsoft-s-t-m203-conversion-kit
https://cults3d.com/en/3d-model/game/gm-94-for-airsoft-s-t-m203-conversion-kit
MrTea
Members
- Aug 22, 2022
- 673
- 457
Printed some molle pyro strikers rather than repeatedly making velcro ones.
Finally finished printing all the parts for the Mosquito build including a slightly different selector plate for the Cyma Platinum gearbox. Despite what the documentation for the mosquito says you can fit a 11.1v triple nunchuck battery in the long suppressor around the inner barrel. Only issue i've had so far is one side of the receiver hasn't printed the external text properly but it is what it is.
Finally finished printing all the parts for the Mosquito build including a slightly different selector plate for the Cyma Platinum gearbox. Despite what the documentation for the mosquito says you can fit a 11.1v triple nunchuck battery in the long suppressor around the inner barrel. Only issue i've had so far is one side of the receiver hasn't printed the external text properly but it is what it is.
