• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Quick Questions & Simple Answers.

Is there any difference between a Gen 2 and a Gen 3 gearbox as i've been told a gen 3 is easier to maintain. (size to fit gen 2 space within gun)?

 
On iPad, sorry, no working colour :(

So wife watching supergirl and I had a quick search as I liked the Colt Model 933 they used on recent episode....

If iPad let's link work...

http://www.imfdb.org/wiki/File:Colt_m933_03.jpg

Any idea if this is available in a format all ready at a shop or easy to customise from something?

Can get some bits but is there an ICS base to use?,

Sorry struggling to get time on here at moment so will monitor email alerts!!

Cheers guys, love always!!! :)

 
djben9 said:
On iPad, sorry, no working colour :(

So wife watching supergirl and I had a quick search as I liked the Colt Model 933 they used on recent episode....

If iPad let's link work...

http://www.imfdb.org/wiki/File:Colt_m933_03.jpg

Any idea if this is available in a format all ready at a shop or easy to customise from something?

Can get some bits but is there an ICS base to use?,

Sorry struggling to get time on here at moment so will monitor email alerts!!

Cheers guys, love always!!! :)
Click to expand...
That looks like a s system with a cqb barrel. I thought in supergirl they was just standard cqb m4 with a riz rail
 
Last edited by a moderator:
sniperslucky said:
Is there any difference between a Gen 2 and a Gen 3 gearbox as i've been told a gen 3 is easier to maintain. (size to fit gen 2 space within gun)?
Click to expand...
Gen 2 or 3 like in SRC gearbox revisions ??

Gen 1 - $hite 6mm green plastic bushings

Gen 2 - think they had metal bushings

Gen 3 - 8mm bearings

Or do you mean gearbox types v2 or v3 ?

V3 's are easier to work and test with motor due to motor frame/cage not needing pistol grip assembled

Plus all wiring is external for easy MOSFET wiring without opening box like on v2

Some v3's don't use motor frame + usual short motor like on AK & G36's

MP5k & SIG use v3 and long motor with adapter

Soz for long answer in case I was unsure

 
Sitting Duck said:
Gen 2 or 3 like in SRC gearbox revisions ??

Gen 1 - $hite 6mm green plastic bushings

Gen 2 - think they had metal bushings

Gen 3 - 8mm bearings

Or do you mean gearbox types v2 or v3 ?

V3 's are easier to work and test with motor due to motor frame/cage not needing pistol grip assembled

Plus all wiring is external for easy MOSFET wiring without opening box like on v2

Some v3's don't use motor frame + usual short motor like on AK & G36's

MP5k & SIG use v3 and long motor with adapter

Soz for long answer in case I was unsure
Click to expand...
Sig uses medium motor without full motor cage. Its not a standard v3 case either its got a few differences but standard v3 internals.
 
Oops stand corrected, knew it wasn't a shorty in a cage

But a guidey thingy majig adapter dooberry

Silly me assuming it must be long mofo motor like on mp5k - my bad

 
Last edited by a moderator:
Sitting Duck said:
Oops stand corrected, knew it wasn't a shorty in a cage

But a guidey thingy majig adapter dooberry

Silly me assuming it must be long mofo motor like on mp5k - my bad
Click to expand...
Would of been better if it was a long type. Medium length are not as common. To be honest thats probably why you dont see Sigs very often, most of the parts are proprietary so upgrading and repairing is a pain because of lack of aftermarket support.
 
Last edited by a moderator:
Mr Monkey Nuts said:
Stark arms, WE and TM glock mags are the same right?
Click to expand...
They're roughly similar, but with slightly different tolerances & performance.

(WE and TM at least, can't speak for Stark)

WE fit & work in a TM, and give it a lot harder kick. CO2; I'd be worried about damaging the pistol.

TM mags fit in a WE, but don't seem to have the 'oomph' to cycle the slide reliably.

This is going off my pair, one TM one WE with two of each brand of mags; bought second hand & TM mags 'upgraded' with Nineball routers (Possibly worse than stock tbh, but don't have originals to compare).

 
I have (half) a can of 134a that's been stored away for approx 5yrs, after I stopped playing.

Looking to get back into it and need to test-and-repair all the old kit.

Is the old gas still safe to use? Or is it a no-go due to the age?

Cheers :-)

 
It'll be fine. Shake well to make sure the lube is dispersed though.

 
Thanks Pro ?

No telling what state the mags will be in though ;-)

 
EdCoombesDogs said:
Can I attach this to the vltor style sight to keep my riz rail on?
Click to expand...
This question seems unintelligible to me. That is a VLTOR style sight, which attaches to a barrel to provide a flip up front iron sight and also allow the addition of a laser or torch because it has a short rail. So "keep my riz rail on" doesn't seem to make sense. Just for clarification, an RIS rail is integrated into the handguard, whereas an RAS system also has rails extending onto/above the receiver.

Mr Monkey Nuts said:
Do herosharks work well in the dark?
Click to expand...
Not as well as mesh with interwoven wires, but they are usable, especially if you are using a torch.

 
Ian_Gere said:
This question seems unintelligible to me. That is a VLTOR style sight, which attaches to a barrel to provide a flip up front iron sight and also allow the addition of a laser or torch because it has a short rail. So "keep my riz rail on" doesn't seem to make sense. Just for clarification, an RIS rail is integrated into the handguard, whereas an RAS system also has rails extending onto/above the receiver.

Not as well as mesh with interwoven wires, but they are usable, especially if you are using a torch.
Click to expand...
OK I mean to keep the hand guard on pictures for reference as don't know the real names sorry

 
EdCoombesDogs said:
Can I attach this to the vltor style sight to keep my riz rail on?
Click to expand...
Yes, providing you're using a standard 2-piece RIS that's held in place by the delta ring and end-cap you can replace the standard A-sight with that VLTOR gas block and it should work.

I'll caveat that though by saying that there's no 'standard' when it comes to airsoft, if your gun has a front sight assembly that's off spec, or barrel pin grooves that are off spec then it may not work at all.

Only way to find out is to try.

 
jcheeseright said:
Yes, providing you're using a standard 2-piece RIS that's held in place by the delta ring and end-cap you can replace the standard A-sight with that VLTOR gas block and it should work.

I'll caveat that though by saying that there's no 'standard' when it comes to airsoft, if your gun has a front sight assembly that's off spec, or barrel pin grooves that are off spec then it may not work at all.

Only way to find out is to try.
Click to expand...
Nice one dude thank you

 
think I've asked this before but what are people using to clean their inner barrels? because I have never known for sure and am intending to get around to doing proper clean of my guns this week. I know should be some kind of lint free cloth but is there anything specific or anything else I should know...to me using cig filters seems like a better method

 
You must log in or register to reply here.

Similar threads

N
What grinds your gears on forums
4 5 6
Replies
118
Views
27K
Lyndication
Lyndication
Gunboat Diplomat
Is Discord a terrible alternative to forums or am I just using it wrong
Replies
18
Views
806
BigAl
BigAl
Grave Squirmer
Unable to list new classifieds advert
Replies
6
Views
459
novioman
N
Tank423
Boots for big boys
Replies
18
Views
1K
Tank423
Tank423
E
Sites worth travelling to.......
Replies
16
Views
636
Jaylordofwaargh
Jaylordofwaargh
Back
Top