Quick Questions & Simple Answers.

[Lozart]

and another!....saves new topics!

These have been out a while but are these rails available anywhere?, not had much luck yet?

http://www.airsoftforum.com/board/topic/191367-review-mtek-fast-g3ag3ct3c-facial-armor-system/

http://www.airsoft2day.com/news/454-airsoft-face-protection-the-fast-t3c.html

You can get them direct from the MTEK webpage or I believe they also have an Ebay store. They are designed to fit a MICH style helmet though so bear that in mind.

 

[TheGrover]

sorry another question....

pressure pads....how would you fit this one? just some velco or tape

can you get grips with a universal groove to fit this in?

http://www.torchdirect.co.uk/xtar-accessories/xtar-pressure-switch.html

already have the torch for other no airsoft reasons so this would be ideal instead of a new one

Just use some electricians tape. Not too tight as to press the switch, but tight enough that the pad won't move. Never had any issues after many skirmishes

 

[djben9]

me again!

can anyone recommend mid caps for an ICS M4 style ,ive read some don't always work?, 6 pack if possible **

**that reminds me, must get back to the gym

NOTE - This was red when I typed it!, any idea whats going on it typed in red, just posted in black??....must be my win7 PC.....

 

[ImTriggerHappy]

http://www.fire-support.co.uk/product/ics-t-mag-midcap-dark-earth-6pcs-box-set-180-rnd-plastic

 

[djben9]

cheers mate, I have them on notify in black....unless I get the Tan CXP one soon!....tempted!

are there other brands that also work/fit well?

 

[djben9]

Haha it is I,

iPad won't allow this in red

Anyone come across or know of where is can get some ver small Velcro straps?, looking on google but not succeeded yet

Basically it's to go through fma helmet clips that came on helmet to the v2face/ear pro

Used zip ties for now, which works but would like some form of strap

Thanks in advance

 

[Lozart]

Haha it is I,

iPad won't allow this in red

Anyone come across or know of where is can get some ver small Velcro straps?, looking on google but not succeeded yet

Basically it's to go through fma helmet clips that came on helmet to the v2face/ear pro

Used zip ties for now, which works but would like some form of strap

Thanks in advance

Homebase - 3M velcro cable ties.

 

[djben9]

Cheers, popped into town but didn't get chance, I'll take a look online, think I saw similar on amazon?

 

[djben9]

curious but is there a difference between these ?

http://www.amazon.co.uk/Generic-Tactical-Airsoft-Protective-Mask-Tan/dp/B00LHJE540/ref=sr_1_38?s=sports&ie=UTF8&qid=1444577399&sr=1-38&keywords=half+face+mask+mesh

and these?

http://www.patrolbase.co.uk/half-face-airsoft-protection/8-fields-mesh-lower-face-ear-protection-tan.htm#.VhqFQaSFPGg

http://www.fire-support.co.uk/product/black-bear-raider-tan-mesh-mask-with-ear-protection

except cost

i got the ones from PB back in July but now looking at the non ear version to fix to my helmet as these seem a struggle a little and dont want to cut them up.... and i have the helmet ear sides anyway.....then goggles/mesh or glasses.....again! haha

 

[Sacarathe]

and i have the helmet ear sides anyway

What do you refer to?

 

[Lozart]

Cheers, popped into town but didn't get chance, I'll take a look online, think I saw similar on amazon?

Yes, you can get them on Amazon. They come in different sizes and colours

 

[Sacarathe]

If I want to use an airsoft suppressor to hide a longer inner barrel is there any effective difference (other than weight) in regard to practical use between outer diameters from 30mm up to 40mm? 100mm and 200mm suppressors only.

 

[PT247]

if just hiding a longer inner barrel the outside diameter of a suppressor will be irrelevant as it will do nothing to deaden the sound

 

[Jedi_Master]

and i have the helmet ear sides anyway...

What do you refer to?

I think the attachable Fast helmet plastic side covers that protect the ears.

 

[Ian_Gere]

If I want to use an airsoft suppressor to hide a longer inner barrel is there any effective difference (other than weight) in regard to practical use between outer diameters from 30mm up to 40mm? 100mm and 200mm suppressors only.

PT is right if the inner barrel reaches to the end of the suppressor. However if there is even a centimetre of gap between the end of the inner barrel and the muzzle, then the size of the suppressor and how much of it is open to air movement (ie not full of foam or completely blocked by something which stabilises the inner barrel) will affect the sound of the shot. In theory at least a wider suppressor will give you more potential for noise cancellation due to out of phase reverberation. That said, the effect is not at all pronounced...

 

[Zak Da Mack]

Anyone know how to negate/remove the AK folding stock tactical wobble? Tried gluing some card to the back but didn't totally work...

 

[Ian_Gere]

Anyone know how to negate/remove the AK folding stock tactical wobble? Tried gluing some card to the back but didn't totally work...

I think the only way forward is to change either the catch or the bit of the stock it locks past. It depends on which make you have though whether you could do that by bending part of the stock, or whether you'd need to actually replace something.

 

[djben9]

I think the attachable Fast helmet plastic side covers that protect the ears.

indeed, ordered while I was shopping at AP!

will fit when mask arrives, they are the rubber ones, cheaper ones, I think others were Kevlar?

 

[Zak Da Mack]

I think the only way forward is to change either the catch or the bit of the stock it locks past. It depends on which make you have though whether you could do that by bending part of the stock, or whether you'd need to actually replace something.

Ah, I assumed it was the pin between the stock and receiver. do E&L do replacement parts for their 105's?

 

[Sitting Duck]

Anyone know how to negate/remove the AK folding stock tactical wobble? Tried gluing some card to the back but didn't totally work...

Bit of rubber - inner tube or something or rubber washer - depending how thick or big the wobble

super glue, epoxy JB weld or something ????