What have you just 3d printed (for airsoft)

[PopRocket123]

I haven't printed this myself but I've designed an SD handguard for someone else's Tac-41L build. He wanted a handguard that would work with his integrally suppressed build so I made him this. I'm looking forward to seeing how it looks on his build.

 

[PopRocket123]

OK at this point it may be an actual addiction. Someone asked about a rail for the TAC 41P. They ended up changing their mind but the idea was planted so I made one anyway

 

[Punisher3990]

OK at this point it may be an actual addiction. Someone asked about a rail for the TAC 41P. They ended up changing their mind but the idea was planted so I made one anywayView attachment 43619

Click to shrink...

Oh it was me who asked about a T41P one. I'm curious what this would look like in the flesh tho. I already bought the Lite chassis and stock, ready for the other rail though

 

[ButcherBill]

Got a VooDoo S printed by MistakenMexican, I bought the file online and the finished article popped through the letter box today, I have a bit of painting to do but I have a good selection of modelling paints to hand.
This will be attached to my L403A1 once it's finished.

I should add... I'm very happy with it, top job Sir.

 

[BigAl]

Got a VooDoo S printed by MistakenMexican, I bought the file online and the finished article popped through the letter box today, I have a bit of painting to do but I have a good selection of modelling paints to hand.
This will be attached to my L403A1 once it's finished.

I should add... I'm very happy with it, top job Sir.

Can see this being very popular til a decent commercial replica is released.

Click to shrink...

 

[BigAl]

HAs anyone made a decent battery box per that looks better than the nasty cheap ones you buy for £15? Big enough for a decent battery and reasonably study but still compact and decent looking. Also with the wiring concealed within exiting underneath directly into. the rail.

 

[PopRocket123]

M-LOK rails for a SCAR H SSR MK20

 

[MasterGouken]

Not as impressive as some of the things on here but I've been working on a Guntology Hex style suppressor shield. Still a bit of work to do

 

[PopRocket123]

Some of you may remember this from when I started it years ago but I'm finally getting round to finishing it.
I've been working on a SCAR H DMR build using a VFC AEG as a base.

I wanted to get rid of the ugg boot with its sketchy contacts in the hinge and hard wire decent cables through the stock. Most buffer tube adapters don't have space for wires so I designed my own. This one replaces the plate the stock mounts to so I can screw the two pieces together since a printed part just isn't strong enough long term to slide on like the original stock does. The only thing this affects is getting the faux bolt out which I'm not bothered by. I also replaces the end plate for the main spring so there's enough space to fit a deans connector through for disassembly. And I included a buffer tube folding stock adapter so I can change the battery just by folding thw stock.

I've designed an m lok rail extension and rails modelled after the Midwest industries rail, designed a straight trigger and a claw charging handle.

This was just a test fit before I print the final parts so there are a few places where I need to improve the fit

 

[mightyjebus]

looks good but the stock hinge might not be strong enough even if you use some of the fancier 3D materials. Check out PCBWAY and upload the design there and select Aluminum (AlSi10Mg) as I've had a few parts made before using it and it's very good. It's not massively expensive but price increases the bigger the item.

 

[PopRocket123]

looks good but the stock hinge might not be strong enough even if you use some of the fancier 3D materials. Check out PCBWAY and upload the design there and select Aluminum (AlSi10Mg) as I've had a few parts made before using it and it's very good. It's not massively expensive but price increases the bigger the item.

Click to shrink...

The hinge itself isn't printed. That was an aluminium one off aliexpress

 

[mightyjebus]

I meant this part:

 

[PopRocket123]

I meant this part:
View attachment 46603

Click to shrink...

Oh I see. I plan on giving it a proper stress test to see how much it takes to break it and where it breaks. In theory it should distribute the load fairly well between the plates that mount it to the receiver, the bolts, threaded inserts and the threads of the buffer tube. Still, probably wouldn't run it with a two pint sling attached to the stock. If I was to get a part custom machined there would be no point machining these parts as they were specifically designed as a workaround for the limitations of 3d printing. If I went down that route I'd get them to make something like this but with the buffer tube lower down instead

 

[ButcherBill]

I'm sure the satisfaction is to be able to print your own but these are available...

Stock

Tactical stocks are designed to reduce felt recoil as well as making steady aiming easier through numerous methods in real arms. Airsoft Stock cannot be attached on real gun.

www.sixmm.com

Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG

Want more stock options for your WE or VFC SCAR? Equip the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG from Patrol Base! CNC Alu build

www.patrolbase.co.uk

 

[PopRocket123]

I'm sure the satisfaction is to be able to print your own but these are available...

Stock

Tactical stocks are designed to reduce felt recoil as well as making steady aiming easier through numerous methods in real arms. Airsoft Stock cannot be attached on real gun.

www.sixmm.com

Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG

Want more stock options for your WE or VFC SCAR? Equip the Airsoft Artisan M4/AR-15 Buffer Tube Adapter for WE/VFC SCAR GBBR/AEG from Patrol Base! CNC Alu build

www.patrolbase.co.uk

Click to shrink...

The problem i have is needing space to run the wires. I dropped the stock down specifically so that I can fit a deans through . I might be able to modify one of those to make the wires fit but it would mean having the whole thing strung together with the wires when I take it apart.

 

[ButcherBill]

Aren't you always going to have that issue unless you front wire the gearbox or buy a GBBR?

 

[PopRocket123]

Aren't you always going to have that issue unless you front wire the gearbox or buy a GBBR?

Click to shrink...

No because by doing it this way the deans connector will fit through the space I've made for it. So I can take the lower off and pull the connector out through the hole in the picture above