Hop up system update

[goodfkingluck]

Hello everyone!

I would like to request some opinion from experienced tuners.
I have an arcturus karambit pdw m4 replica (140 mm inner barrel). I would like to increase and accuracy with that inner barrel lenght so i consider to buy some parts:

Maple leaf macaron 60• bucking
Maple leaf omega nub
Lambda “five” 6.05 inner barrel (not sure about 05 maybe lower)
Maxx Model m4a pro chamber

I collected them based on forums and videos but im beginner in this topic.

My replica do 1.1-1.2 J with 0.28 BB
After upgrade i would like to use 0.3 BB

What do you think is it a good set for my point?

Thanks for any help.

 

[Lozart]

Try changing just the bucking and nub first.

 

[Skara]

Replace one part at the time and see how it affects performance..
It's also easier to troubleshoot.

Mind you that by changing any of these components *might* require a different nozzle (both length and shape of the tip).

 

[goodfkingluck]

Okay guys thank you. I will start it step by step, bucking first.

 

[Hudson]

I wouldn't bother with the maxx hop unit personally.
I've found them to be rather overrated and inferior to something like a basic zci hop unit; not to mention the need to change the air nozzle length.

The rest of the choices seem decent enough though!

Take a gander over at www.ak2m4.co.uk as @ak2m4 is a cracking fella and will be able to sort you out.

 

[Austeyr]

something like a basic zci hop unit

Click to shrink...

Literally the go to when I was building AEGs. Just to clarify though for OP, the cheap black plastic one, not the metal one

 

[Colin Allen]

I wouldn't bother with the maxx hop unit personally.
I've found them to be rather overrated and inferior to something like a basic zci hop unit; not to mention the need to change the air nozzle length.

The rest of the choices seem decent enough though!

Take a gander over at www.ak2m4.co.uk as @ak2m4 is a cracking fella and will be able to sort you out.

Click to shrink...

I second this; The Maxx hop unit is overpriced and just not very good; I would recommend either the plastic ZCI or Specna units.