-
2FA temporarily disabled, emails not working
2FA has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.
Theta 3-9x40 EG scope looking for user manual?
- Thread starter harry gee
- Start date
EDcase
AF-UK patch owner
- Jun 24, 2017
- 3,642
- 1,644
There isn't much to know.
It likely uses a CR2032 battery under the illumination cap
You change the FOV by turning the adjustment ring in front of the eyepiece. (Power change ring)
View attachment 124478
Last edited by a moderator:
Speedbird_666
AF-UK patch owner
- Jul 28, 2014
- 1,719
- 1,328
It's a generic rebranded cheap chinese scope, search '3-9x40 EG scope' on youtube and you'll find loads of hits of the same scope, but with different branding.
As @EDcase says, there really is nothing to them in terms of controls - you have adjustment turrets for windage and elevation (remove the caps, you will see the directions to turn on the dial underneath), a rotating ring to adjust the magnification, and a dial to switch on and adjust the power/colour of the illuminated reticle which has the battery underneath the cap.
View attachment 124487
There are millions of these on Aliexpress (again search '3-9x40 EG scope') - you'll be able to work out the operation of the scope from the information pictures they post in the adverts as above.
As @EDcase says, there really is nothing to them in terms of controls - you have adjustment turrets for windage and elevation (remove the caps, you will see the directions to turn on the dial underneath), a rotating ring to adjust the magnification, and a dial to switch on and adjust the power/colour of the illuminated reticle which has the battery underneath the cap.
View attachment 124487
There are millions of these on Aliexpress (again search '3-9x40 EG scope') - you'll be able to work out the operation of the scope from the information pictures they post in the adverts as above.
EDcase
AF-UK patch owner
- Jun 24, 2017
- 3,642
- 1,644
Search youtube with "How to zero a scope"
There will be loads of explanations ?
You'll need a steady shooting position and a target that you can see how far away from the centre the BBs hit.
Then just turn the adjustment screws a bit for correction of Windage (left-right) and Elevation (up-down)
Then shoot again and see if its closer to the centre of the target.
There will be loads of explanations ?
You'll need a steady shooting position and a target that you can see how far away from the centre the BBs hit.
Then just turn the adjustment screws a bit for correction of Windage (left-right) and Elevation (up-down)
Then shoot again and see if its closer to the centre of the target.
Last edited by a moderator:
