Gun picture thread

[Guest]

picked up 2nd hand in A1 condition Cybergun (ARES) SCAR SC

View attachment 101772

View attachment 101773

The Romeo8T really suits that

 

[Krisz]

That's a nice gun, I bought a couple of raffle tickets to win one at Airsoft Competitions, sad not to win it.

Don't be too sad new mini scar in the works! You can find some videos on YT from this year's MOA (Taiwan). Fully licensed fn trademarks. Oem could be vfc I'm not sure.

 

[mightyjebus]

Don't be too sad new mini scar in the works! You can find some videos on YT from this year's MOA (Taiwan). Fully licensed fn trademarks. Oem could be vfc I'm not sure.

Cybergun are releasing another 3 SCAR SC's in Grey, Tan and Black but the OEM will be BOLT instead of ARES.

 

[Jez_Armstrong]

3D printed "FANTA" cover for the surefire can, I only had red filament left so the paint has come out a bit lighter on top but I think that looks pretty good

View attachment 101916

View attachment 101917

View attachment 101918

View attachment 101919

 

[mightyjebus]

3D printed "FANTA" cover for the surefire can, I only had red filament left so the paint has come out a bit lighter on top but I think that looks pretty good

Nice. If you want to print another with the correct name, let me know and I'll send the file across (yeah I made the Fanta one)

 

[Jez_Armstrong]

Nice. If you want to print another with the correct name, let me know and I'll send the file across (yeah I made the Fanta one)

Yes please! As a few of the lads would like one, much thanks for doing the original 

 

[mightyjebus]

Yes please! As a few of the lads would like one, much thanks for doing the original 

no worries, give me a day or 2 to find it and modify it again. it's on one of these external HDD's somewhere!

 

[alxndrhll]

I’m sure some bits will change around once it’s getting used in anger but the arrival of the can and sling sees this one just about there.

View attachment 101990

 

[mightyjebus]

Yes please! As a few of the lads would like one, much thanks for doing the original 

manta complete meshed.stl

Here's the STL file. let me know if you have problems printing.

 

[Enid_Puceflange]

I’m sure some bits will change around once it’s getting used in anger but the arrival of the can and sling sees this one just about there.

View attachment 101990

That’s giving me a MAHOOSIVE inferiority complex ?

 

[mightyjebus]

did a test print of the Manta and it fits the Angrygun can no problem. Black is the Manta and coloured is a painted fanta I did ages ago.

View attachment 102052

 

[MrTea]

Finally, pictures of my 'finished' G&G MP5A4 EBB. In the second pic you can see the rear drum sight is chipped, still looking for a replacement. Upgrades/changes as follows;

• Rocket Airsoft high torque motor
  
• Rocket Airsoft 12:1 high speed gears
  
• ZCI 240mm inner barrel
  
• Maple Leaf Macaron Bucking
  
• Maple Leaf Omega Nub
  
• Gate Pico SSR3 MOSFET (just to let the gun run 11.1v LiPo)
  
• CYMA MP5 Low profile mount
  
• Nuprol M110 Spring
  
• Rocket Airsoft Rotary Bearing spring guide
  
• New Guarder tappet plate
  
• Rocket Airsoft Piston
  
• Full metal piston rack
  
• CYMA metal RIS handguard
  
• Standard Tamiya connections rewired to Deans
  
• Genuine HK 3-point sling (I believe)
  
• ASG B&T Tracer unit. Changed the outer sleeve with a knock off one which fits perfectly and removes the ugly trademarks.
  
• Olight Odin with tapeswitch.
  

Gun no longer 'twangs' when fired and has a high RPS but I haven't got a chrono to tell properly. 11.1v 30c batteries get toasty after a lot of semi fire. FPS is a steady ~339. Hopefully going to take it to a CQC field later this week and put it through its paces.

View attachment 102090

View attachment 102091

 

[JimFromHorsham]

View attachment 102093
 

Apache & NGRS  

 

[OTH21]

Recently upgraded LCT TKMS by Luke at Neg Airsoft.

I've then replaced the original black lower handguard with LCT wood and replaced the black pistol grip with an LCT plum one. Kept the upper handguard, which took a bit of filing down to fit on top of the wood lower. 

View attachment 102338

View attachment 102339

View attachment 102340

 

[Hellfish]

Currently faffing about trying to recreate My in game Modern Warfare AKS74u .... not 100%, but I'm pretty happy otherwise

View attachment 102407

View attachment 102408

 

[Nick G]

New project, been gifted a broken WE GBBR Thompson. Upper reciever is cracked so I've ordered a new one, now do I get some decent wood (fnar fnar) and rebuild it as a Thompson ........

View attachment 102428

Or do I use this, Snow wolf M41 A body kit ? 

View attachment 102430

GBBR Pulse rifle anyone ?

 

[Lozart]

New project, been gifted a broken WE GBBR Thompson. Upper reciever is cracked so I've ordered a new one, now do I get some decent wood (fnar fnar) and rebuild it as a Thompson ........

View attachment 102428

Or do I use this, Snow wolf M41 A body kit ? 

View attachment 102430

GBBR Pulse rifle anyone ?

View attachment 102434

Pulse rifle or GTFO.

 

[Nick G]

View attachment 102434

Pulse rifle or GTFO.

So, Pulse rifle then ? ?

 

[EDcase]

So, Pulse rifle then ? ?

There really is NO other option ?

 

[Nick G]

There really is NO other option ?

Well we could take off and nuke the entire site from orbit ? But since I am very easily led and have no will power to resist, a pulse rifle it will be then ?