Gun picture thread

[TheFull9]

Bored at home, built a rack. Im sure the family will be happy to have them off the ground...

Literally the racks you get at the start when you go to play a gun course trial in modern warfare.

 

[HuttArmouries]

my collection of primaries. Being the airsoft hipster I am there isnt an m4 in sight. More than half of these were bought broken and repaired. 

View attachment 56575

 

[Asomodai]

my collection of primaries. Being the airsoft hipster I am there isnt an m4 in sight. More than half of these were bought broken and repaired. 

View attachment 56575

Thats a short SVU!

 

[HuttArmouries]

Thats a short SVU!

Came with a short maple leaf barrel in it so there wasnt much point leaving the suppressor on it. Still have it laying around though ^_^

 

[LoneTactix]

Recently sold this, but missing it a little. G&G Top Tech MP5.

View attachment 56589

 

[Ad_]

My Tokyo Marui P90, my favourite & one of my oldest guns.

View attachment 56616

Doesn't look much different to stock externally, but it's had a few upgrades:

G&P metal upper receiver
Prometheus 6.03 barrel, Prometheus purple hop rubber, AirsoftPro "stability snob"
Guarder air seal nozzle, Guarder steel cylinder head, Guarder chromed cylinder
Guarder polycarbonate piston with Systema Area 1000 aluminium piston head
Guarder SP90 spring
Prometheus bearing spring guide
Systema oilless metal bushings
Prometheus hard cut-off lever
Stock motor & gears

Wired with a basic MOSFET (IRF2804, used to have an active braking MOSFET module fitted but replaced it as it made the main spring make a "boing" noise after firing whenever it was fired on semi auto), blade fuse, Deans connector

Does a little over 330fps

 

[mightyjebus]

Double Eagle M904G. 106 quid for a ridiculously good little AEG. Hair trigger, Binary firing and 1 to 5 round burst option on full auto. Think ARP 9 but better.

 

[Tackle]

Double Eagle M904G. 106 quid for a ridiculously good little AEG. Hair trigger, Binary firing and 1 to 5 round burst option on full auto. Think ARP 9 but better.

'kin ell, that's a touch, who sells them ?

 

[Guest]

'kin ell, that's a touch, who sells them ?

TaiwanGun I expect

 

[mightyjebus]

TaiwanGun I expect

correct...they have a few different models and the longer the rail the higher the price but the internals are all the same.

 

[Tackle]

TaiwanGun I expect

I've been on there a few times lately, but to be honest when scrolling through the aegs I've prob "faded out" the monstrous number of AR derivatives, plus double eagle isn't a brand I've ever considered, but that looks the dogs, with a lot of features for very little money, be interested to see what @mightyjebushas to say about after a few mags through it etc, back garden range maybe ?.

sons gf is already talking about a backup to her uar, might do the job ?

 

[mightyjebus]

I've been on there a few times lately, but to be honest when scrolling through the aegs I've prob "faded out" the monstrous number of AR derivatives, plus double eagle isn't a brand I've ever considered, but that looks the dogs, with a lot of features for very little money, be interested to see what @mightyjebushas to say about after a few mags through it etc, back garden range maybe ?.

sons gf is already talking about a backup to her uar, might do the job ?

I'll have a review up in a day or 2. initial opinion is it's fantastic. DE have been terrible for years but this is their attempt to enter the better quality low budget range and so far they have knocked it out the park with this model. it's almost at the price point that if you get a few games out of it and then it breaks, chuck it away and buy another but so far the quality doesn't look like it will break anytime soon.

my only gripe so far is the space for the battery isn't great 7.4v 1300Mah LIPO fits but I want to run something bigger so I've already designed a battery extension which will be free to print.

View attachment 56636

 

[Skara]

Double Eagle M904G. 106 quid for a ridiculously good little AEG. Hair trigger, Binary firing and 1 to 5 round burst option on full auto. Think ARP 9 but better.

That is one nice clone of the Honey Badger (the real one made by Q, not the Ares piece of shit I have)

 

[Encore]

Oh oh oh! I've got a honey badger too!

G&G PDW15 - AR.

Externals:

Repro Vortex UH-1 & VMX-3T magnifier

PDW stock switched to buffer tube and PTS EPS stock

Fortis shift grip

PTS MOE grip

Internals:

Fusion Engine (Green nozzle, red poppet)

Maxx Hop unit

Maxx adjustable trigger

SLR gold dummy bolt

Maple leaf Macron 50 degree hop rubber

Lambda Five (6.05mm ID) 303mm inner barrel (Claims a 1 micron finish and having looked down the barrel I'd believe it)

View attachment 56648

 

[Skara]

I'm confused

https://www.liveqordie.com/products/honey-badger-by-q/

dis the real honey badger

 

[Encore]

I'm confused

https://www.liveqordie.com/products/honey-badger-by-q/

dis the real honey badger

AFAIK there aren't any exact clones of the hone badger, each airsoft version does something a little different. In the G&G case, its the front hand guard, its more rounded in profile compared the current gen honey badgers though there are images that show a more rounded hand guard for the RS version too. 

I think for airsoft its a matter of close enough. People like the look overall (I suspect the integral look of the suppressor with a profile matching rail) and since no military uses them as issue weapons no one is trying to make an exact replica for imitation purposes.

 

[HuttArmouries]

Im really not much of an m4 person but a few different things came on sale at the same time so here I am. Might put a car15 stock on it and front wire it. Ill see what happens. 

View attachment 56655

 

[Cromulon1994]

I think this is it for now. Unless I sell my m870...SAA has gone now.

Ktw: winchester 1873 rifle

Ktw: flintlock pistol

ASG: Smith and Wesson model 3

King arms: SAA

Denix modified for airsoft: 12ga coach

View attachment 56668

And then this as a total opposite of the first few.

Well p362, pneumatic target pistol. Deliciously accurate, incredibly consistent, its a clone of the maruzen APS-3.

View attachment 56671

 

[Seeker Bravo]

Oooooo, where? Im almost afraid to field mine in fear of falling on my a** like usual and breaking it...

Hi, I'm from Korea. The manufacturer 'Toystar' discontinued producing metal body of K1,2 at 2018. You have to get used one from Korea, also it's quite hard to get.

 

[SeniorSpaz87]

Well after 6 months of digging through my basement I finally found that pesky valve for my Tag-015 that went flying across the room when I disassembled it to repair a leak. As such I was finally able to move forward on my SSG PP-19-01 and get it finished. I have two optics to decide on - a Kobra and a PK-06, both real from Russia. One will go on my real KR-9 (civi version of the Vityaz, which is what the PP-19-01 is based on), while the other will go on the 19. Unfortunately both are at work in my KR-9's box, so itll be fall before I get ahold of either one again as work has been cancelled through till the end of August...

Also my SR-25, just because Ive never posted it here. 

View attachment 56795View attachment 56796