For sale Rifle WE AKS 74UN GBBR (Boneyard)

Hello all
Looking to sell my WE AKS74UN GBBR that's in need of some minor TLC to get working and shooting reliably

TO GET THE PRIMARY ISSUE OUT OF THE WAY:

The firing pin spring is warped/damaged leading to inconsistent firing, sometimes it shoots, sometimes it doesn't as its not knocking the valve properly, that's pretty much it

I have a complete FCG spring set replacement on its way to me from KYAirsoft which I will fit when it arrives and restore it to working condition, to which I'll relist as working with shooting videos etc

but just looking to let it go if interest is garnered sooner

Comes with:

• 10x Magazines
• 4x AKM Style
• 5x WE 74 Polymer Style
• 1x WELL CO2 Magazine

Additional Extras:

• Hinge Buffer Tube
• Spare Recoil Rod assembly with a rather rare FG Airsoft Buffer (this increases travel to around 66% over the RA-Tech's 50% Travel guide rod mods have also been applied here)
• RA-Tech CNC Steel Heavy Piston

A Plethora of internal spares, though notably a spare complete stock nozzle assembly,
The muzzle retaining spring and pin is packed seperately as it likes to go walkies, best to put this in after your muzzle brake of choice

Internal Upgrades:

• RA Tech Dynamic Spring System for WE AK series
• this thing is a massive improvement over the original recoil rod assembly with a quality shock absorbent buffer and one piece CNC Block
  Further, the bushing which secures the rod has been shimmed to reduce wobble and straighten the bolt travel
  reducing wear and risk of shearing off bolt guides
• RA-Tech NPAS, adjusted and shooting consistently and comfortably 330-300fps .2 on propane (adjustment tool is included)
• The FCG has been gutted in its entirety and replace with entirely steel parts

Trigger Box Specific Upgrades:
the Zamak Cheese internals have been gutted and replaced with Steel in their entirety:

• Wii Tech CNC Steel Hammer
• Wii Tech CNC Steel Sear
• Wii Tech CNC Mag Cutoff Lever
• Wii Tech CNC Steel Rate Limiter (In-Battery Sear)
• RA-Tech CNC Steel Trigger
• RA-Tech CNC Steel Firing Pin
• RA-Tech CNC Steel Valve Locker
  
  Hop/Barrel:
• Maple Leaf Crazy Jet 180mm Inner Barrel (to be able to use this thing with tracer units as the stock inner stupidly extrudes beyond the thread)
• Maple Leaf Autobot 50 Degree Rubber (when it is shooting, its shooting beautifully with this combo up to a .3)

External Upgrades:

• Zentico RP-1 Charging Handle that has been permanently affixed using epoxy (there should be no risk of breakages as it is extremely lightweight around 5g)
• W&S Steel Classic Selector to replace the absoulte eye gouging attempt WE made at doing a Krebs Selector

Condition:

• The Polymer Mags are a little worse for wear, and have cracked shells, mainly around the top
• they otherwise lock into the reciever, feed and shoot reliably
• Some of the Stop on Empty mechanisms would benefit from being donored from the AKM magazines, I can do this for you if you plan to run the 74 Style only
• replacement shells can be had for £10 from KY airsoft
• The stock is slightly canted to the right, the pictures tend to exaggerate it, but I didnt bother to straigten it as it actually makes shouldering with a plate carrier easier

External condition is great
Internal condition is excellent, nothing of mention, shoots and feeds reliably and stops on empty

Overall build cost comes in excess of £1000+ and my sanity, I could take this entire thing apart with my eyes closed at this point

Asking for £475 collected which I feel is fair and reflective of condition and included extras
or £500 Posted to your door on PF48

Paypal
or
Collection (W Yorkshire)

Additional Information:
When its working, its shooting fantastically with an exceptional recoil impulse and feedback, very much in line with offerings from VFC/TM/GHK

this should be a ready to go Skirmishing Package or an excellent base if you want to play dress up, I can confirm it fits 5KU zenitco parts with little to no modification

Please contact me via PM or text on 07967057776
Thanks