-
PXL_20261005_085833451.webp -
20211228_122720.webp -
20211228_122727.webp -
20211228_122744 (1).webp -
20211228_122729 (1).webp -
20211228_122731 (1).webp -
20211228_122828 (1).webp -
20211228_122942 (1).webp
- Condition
- Used
- FPS
- 330
Excellent condition base gun Tokyo Marui MP5K with a number of upgrades added, both internal and external. Rate of fire is very high and crisp trigger response (I have it recorded somewhere, will try and dig it out, but I took a video to give an idea). Range and accuracy is also very good due to tightbore and r-hop barrel. Gun has been tuned very well to ensure all of the parts function perfectly together rather than just slapping new parts in, so it shoots like a dream.
Internal upgrades:
-SHS high torque motor
-Madbull 247mm tightbore 6.03 barrel (extends into the suppressor and has been stabilised for accuracy)
-R-hop (tuned for 0.25g but setup to make it easily tuneable for up to 0.28g)
-Mosfet installed and converted to Deans for lower resistance (low resistance wiring installed also)
-Tokyo Marui 3/4 ported cylinder
-G&G polycarb and metal teeth piston (removed 2nd to last piston tooth to prevent pre-engagement issues due to high RoF)
-Uprated SHS M120 spring to maintain RoF and FPS given piston adjustments
-SHS 12.1 gears - perfectly shimmed
-Upgraded / stronger gearbox (to confirm brand)
-Upgraded SHS bearings
-Element vortex ball bearing spring guide
-Element dual o-ring air nozzle
-Element double o-ring cylinder head
External upgrades:
-Cyma fully metal MP5K body
Comes with the following accessories:
-4 x TM 200rd magazines
-11.1v lipo battery that fits into the stock (I have modified the stock to allow use of a larger battery, you can still fit one in the top as standard if you prefer)
-suppressor adapter and suppressor
-3 point sling
-red dot sight with integrated laser sight and switch on the front grip so you can toggle on/off without moving your hands in CQB
-Foldable stock
Probably my favourite ever build from over many years of airsofting and upgrading them. Couple of disclosures - I don't have a chrono anymore, but when I built this a couple of years ago it was dialled to a consistent 330, but I cannot confirm this will be 100% accurate now. Missing one of the pins that goes just behind the magazine well, but the body is held firmly in place by the stock pins - absolutely rock solid feel with the metal body.
Collection from London, happy to show it working on collection but don't exactly have a range! Valid UKARA required for sale. I was an active member of Zero In forum for years under the same username before it closed down and had tonnes of feedback on there.
Internal upgrades:
-SHS high torque motor
-Madbull 247mm tightbore 6.03 barrel (extends into the suppressor and has been stabilised for accuracy)
-R-hop (tuned for 0.25g but setup to make it easily tuneable for up to 0.28g)
-Mosfet installed and converted to Deans for lower resistance (low resistance wiring installed also)
-Tokyo Marui 3/4 ported cylinder
-G&G polycarb and metal teeth piston (removed 2nd to last piston tooth to prevent pre-engagement issues due to high RoF)
-Uprated SHS M120 spring to maintain RoF and FPS given piston adjustments
-SHS 12.1 gears - perfectly shimmed
-Upgraded / stronger gearbox (to confirm brand)
-Upgraded SHS bearings
-Element vortex ball bearing spring guide
-Element dual o-ring air nozzle
-Element double o-ring cylinder head
External upgrades:
-Cyma fully metal MP5K body
Comes with the following accessories:
-4 x TM 200rd magazines
-11.1v lipo battery that fits into the stock (I have modified the stock to allow use of a larger battery, you can still fit one in the top as standard if you prefer)
-suppressor adapter and suppressor
-3 point sling
-red dot sight with integrated laser sight and switch on the front grip so you can toggle on/off without moving your hands in CQB
-Foldable stock
Probably my favourite ever build from over many years of airsofting and upgrading them. Couple of disclosures - I don't have a chrono anymore, but when I built this a couple of years ago it was dialled to a consistent 330, but I cannot confirm this will be 100% accurate now. Missing one of the pins that goes just behind the magazine well, but the body is held firmly in place by the stock pins - absolutely rock solid feel with the metal body.
Collection from London, happy to show it working on collection but don't exactly have a range! Valid UKARA required for sale. I was an active member of Zero In forum for years under the same username before it closed down and had tonnes of feedback on there.
