-
PXL_20260625_135908334.webp -
PXL_20260625_135914955.webp -
PXL_20260625_135919495.webp -
PXL_20260625_135944945.webp -
PXL_20260526_154039064.webp
- Condition
- Used
Tokyo Marui GBB AKM with upgraded parts.
Internal upgrades:
1. Jaeger Precision Alpha Arm 2.0 for Tokyo Marui AKM
2. Jaeger Precision Tokyo Marui AKM/AKX NPAS Adjustable Valve
3. 4UANTUM Friction Pro High Performance Hop-Up Bucking GBB
4. Dragon workshop steel bolt and gas piston
5. Bavtac 115% spring
External:
1. Airsoft Shein Izmash brown wood furniture
2. RS AKM dust cover
3. 3 TM AKM magazines with Archwick Magazine Inlet Valves for green gas filling in each magazine (with 2 spare valves for any more magazines)
Also comes with the following not installed:
1. RS Bakelite pistol grip
2. Real Power Steel receiver and barrel kit. Has been fitted and has no fitment issues (e.g no droopy barrel), but you cannot install the innerbarrel+hop unit with the blank fire switch attached as it will snap the spring nub off (this has been glued back on and works as intended in the standard receiver). Also had a missing rivet which was replaced by me. Needs to be refinished, as an attempt to paint it by me went awry.
3. LCT gas tube with wood upper handguard for fitting with the steel receiver.
4. LCT wood lower handguard
5. RS non-lacquered AKM hanguards with LCT gas tube.
6. Original plastic furniture, spring and bolt.
7. 3D printed mag loader
Internal upgrades:
1. Jaeger Precision Alpha Arm 2.0 for Tokyo Marui AKM
2. Jaeger Precision Tokyo Marui AKM/AKX NPAS Adjustable Valve
3. 4UANTUM Friction Pro High Performance Hop-Up Bucking GBB
4. Dragon workshop steel bolt and gas piston
5. Bavtac 115% spring
External:
1. Airsoft Shein Izmash brown wood furniture
2. RS AKM dust cover
3. 3 TM AKM magazines with Archwick Magazine Inlet Valves for green gas filling in each magazine (with 2 spare valves for any more magazines)
Also comes with the following not installed:
1. RS Bakelite pistol grip
2. Real Power Steel receiver and barrel kit. Has been fitted and has no fitment issues (e.g no droopy barrel), but you cannot install the innerbarrel+hop unit with the blank fire switch attached as it will snap the spring nub off (this has been glued back on and works as intended in the standard receiver). Also had a missing rivet which was replaced by me. Needs to be refinished, as an attempt to paint it by me went awry.
3. LCT gas tube with wood upper handguard for fitting with the steel receiver.
4. LCT wood lower handguard
5. RS non-lacquered AKM hanguards with LCT gas tube.
6. Original plastic furniture, spring and bolt.
7. 3D printed mag loader
