• Welcome to the New Classifieds. Found a problem? Go Here

    Same rules apply for the New Classifieds.

    Please note that the major difference between the old and new classifieds is the following:
    • Ads can be listed for up to 120 days before they expire.
    • You can relist an expired ad after 120 days. Ads may be relisted an unlimited number of times.
    • Every 7 days you may bump your ad - this is like 'renewal' on the old Classifieds as it sends your listing to the top.
MWS 11.5 inch
MWS 11.5 inch

For sale Rifle MWS 11.5 inch

Tokyo Marui MWS with 6 mags, carry case and spares.
£450.00
Make
Tokyo Marui
Model
MWS 11.5INCH

Details

  • PXL_20260703_203631225.RAW-01.webp
    PXL_20260703_203631225.RAW-01.webp
    118.4 KB · Views: 614
  • PXL_20260703_203645271.RAW-01.webp
    PXL_20260703_203645271.RAW-01.webp
    51.1 KB · Views: 19
  • PXL_20260703_203651407.RAW-01.webp
    PXL_20260703_203651407.RAW-01.webp
    122.1 KB · Views: 17
  • PXL_20260703_203656885.RAW-01.webp
    PXL_20260703_203656885.RAW-01.webp
    63.3 KB · Views: 16
  • PXL_20260703_203708479.RAW-01.webp
    PXL_20260703_203708479.RAW-01.webp
    60.1 KB · Views: 14
  • PXL_20260703_203719205.RAW-01.webp
    PXL_20260703_203719205.RAW-01.webp
    58.9 KB · Views: 13
  • PXL_20260703_203732515.RAW-01.webp
    PXL_20260703_203732515.RAW-01.webp
    89.7 KB · Views: 12
  • PXL_20260703_203743996.RAW-01.webp
    PXL_20260703_203743996.RAW-01.webp
    112.9 KB · Views: 12
  • PXL_20260703_203855742.RAW-01.webp
    PXL_20260703_203855742.RAW-01.webp
    101.1 KB · Views: 16
  • PXL_20260704_164618225.RAW-01.webp
    PXL_20260704_164618225.RAW-01.webp
    92.8 KB · Views: 9
Condition
Used
FPS
325
Used Tokyo Marui MWS GBB rifle with 6 mags (2 Stanags and 4 PTS all holding gas) carry case and spares.
Damage to the nozzle HOWEVER has not and does not affect the use of the GBBR.
60 degree flamingo hop rubber.
10p mod in buffer tube to stop bolt bounce (you can have the 10ps you're welcome)
Npas fitted (can't remember brand).
Comes with spare nozzle return springs, Spare Mag Rubber seals, Magazine high flow valve, new TDC hop unit, gun wrench and carry case.
The outer barrel end threads have been completely stripped due to a friend stripping a suppressor unit off without undoing the grub screw. I have a new Balystik putter barrel however the standard MWS barrel nut does not fit over the new outer barrel. A normal M4 One will as I have tested this but do not have one spare (tried one from an old KWA T10).
The magazines and gun show wear as this has been a primary for over a year. I now am leaving the sport due to other commitments where I haven't been able to play for a few months.
Any questions feel free to ask.

Classified ad information

Posted by
Mike_Atkinson
Feedback score
+1 /0 /-0
Category
Gas
Views
32
Expires
Location
Portsmouth

More in Gas

Share this classified ad

Back
Top