- Condition
- Used
- FPS
- 330
Been a long while since these have seen the light of day. Had a family, moved away from the sport, you know how it goes.
Always held onto these just in case, but I think its time to part ways...
Those who know them know the value here, happy to have any genuine conversations/offers.
1 PTW Challenge Kit - RS Miad (trimmed), Noveske 9" front., Breacher flashhider UBR stock, fully extends (Battery on mini deans in stock tube itself). Replica T1, PEQ, MBUS, Replica Bushnell magnifier (Not pictured, must be in bits box) thats sits in the rail gap. Milled CNC magpul lower received. Toughened hop bushes, programmed to Semi/3Rnd. Was built from new by the legendary centurion services way back who also did the lower fitting and custom motor adjustments.
1 PTW Max - Purchased as a backup (as i stopped using non systema's all together). Brushed M1A1 outbarrel, 500 Lumen torch, RS Vltor stock and stock tube, Toughened hop bushes (again modified to accept mini deans) Semi/FA
I will make note that while they are working, id highly recommend a motor service on both, this is routine maintenance for PTW's and can be done fairly cheaply at any good RC shop.
2 x Cylinders
Black M90 trimmed (280) very high rate of fire in the CK for milsim
Gold M110 (330) great for all outside use
10 Genuine Systema Magazines, all shell replaced with Magpull shells, and Magpull ends, rounded with skate tape (much easier in gloves)
All working to my knowledge. Have some spares for these (feeders followers etc)
Genuine Peli 1750 Case + Inserts, still sell for a pretty penny today (RRP 450), but will come with the set if all purchased together
Always held onto these just in case, but I think its time to part ways...
Those who know them know the value here, happy to have any genuine conversations/offers.
1 PTW Challenge Kit - RS Miad (trimmed), Noveske 9" front., Breacher flashhider UBR stock, fully extends (Battery on mini deans in stock tube itself). Replica T1, PEQ, MBUS, Replica Bushnell magnifier (Not pictured, must be in bits box) thats sits in the rail gap. Milled CNC magpul lower received. Toughened hop bushes, programmed to Semi/3Rnd. Was built from new by the legendary centurion services way back who also did the lower fitting and custom motor adjustments.
1 PTW Max - Purchased as a backup (as i stopped using non systema's all together). Brushed M1A1 outbarrel, 500 Lumen torch, RS Vltor stock and stock tube, Toughened hop bushes (again modified to accept mini deans) Semi/FA
I will make note that while they are working, id highly recommend a motor service on both, this is routine maintenance for PTW's and can be done fairly cheaply at any good RC shop.
2 x Cylinders
Black M90 trimmed (280) very high rate of fire in the CK for milsim
Gold M110 (330) great for all outside use
10 Genuine Systema Magazines, all shell replaced with Magpull shells, and Magpull ends, rounded with skate tape (much easier in gloves)
All working to my knowledge. Have some spares for these (feeders followers etc)
Genuine Peli 1750 Case + Inserts, still sell for a pretty penny today (RRP 450), but will come with the set if all purchased together
