-
IMG_7173.webp -
IMG_7174.webp -
IMG_7175.webp -
IMG_7176.webp -
IMG_7177.webp -
IMG_7178.webp -
IMG_7179.webp -
IMG_7181.webp
- Condition
- As New
The InvisibleSight (IS) LA5 is a high-end, "boutique" replica of the L3Harris AN/PEQ-15 (LA-5/PEQ). Unlike standard airsoft clones, InvisibleSight units are known for using high-quality internal components, often being "real-steel" rated for recoil and holding zero on actual firearms.
Below are the typical specifications for the InvisibleSight LA5-B/C (Standard and High Power) models:
Optical Performance
Feature
Specification
Visible Laser
Red (5mW )
IR Laser
850m (typically ~0.7mW Low /
25mW+ High)
IR Illuminator
Focusable (Spot to Flood)
Illuminator Power
Variable (30mW)
Co-alignment
VIS and IR lasers are co-aligned (adjusting one zeroes both)
Physical & Technical Specs
• Housing Material: High-strength reinforced polymer (matching the texture and "fiber" look of the real L3 unit).
• Mounting: Integrated MIL-STD-1913 Picatinny rail mount.
• Battery: 1x CR123A (3V).
• Waterproofing: O-ring sealed (usually rated for water resistance, though depth ratings vary by batch).
• Weight: Approximately 7.5 oz (212g) with battery.
• Remote Port: Standard "Crane-style" 3.5mm plug (compatible with SureFire/Unity Tactical switches).
Key Differentiators
• Adjustment Knobs: Features the distinct "LA5" raised adjustment knobs that can be turned by hand, unlike the flat-head screw adjustments on a standard PEQ-15.
• Internal Potting: The electronics are typically "potted" (encased in epoxy), which protects the circuitry from the shock of recoil.
• Power Levels: Most IS units include a "blue screw" (or similar safety mechanism) that, when removed, allows the unit to enter High Power (HP) modes for long-distance signaling.
Never used in game
Below are the typical specifications for the InvisibleSight LA5-B/C (Standard and High Power) models:
Optical Performance
Feature
Specification
Visible Laser
Red (5mW )
IR Laser
850m (typically ~0.7mW Low /
25mW+ High)
IR Illuminator
Focusable (Spot to Flood)
Illuminator Power
Variable (30mW)
Co-alignment
VIS and IR lasers are co-aligned (adjusting one zeroes both)
Physical & Technical Specs
• Housing Material: High-strength reinforced polymer (matching the texture and "fiber" look of the real L3 unit).
• Mounting: Integrated MIL-STD-1913 Picatinny rail mount.
• Battery: 1x CR123A (3V).
• Waterproofing: O-ring sealed (usually rated for water resistance, though depth ratings vary by batch).
• Weight: Approximately 7.5 oz (212g) with battery.
• Remote Port: Standard "Crane-style" 3.5mm plug (compatible with SureFire/Unity Tactical switches).
Key Differentiators
• Adjustment Knobs: Features the distinct "LA5" raised adjustment knobs that can be turned by hand, unlike the flat-head screw adjustments on a standard PEQ-15.
• Internal Potting: The electronics are typically "potted" (encased in epoxy), which protects the circuitry from the shock of recoil.
• Power Levels: Most IS units include a "blue screw" (or similar safety mechanism) that, when removed, allows the unit to enter High Power (HP) modes for long-distance signaling.
Never used in game
