- Condition
- Used
- FPS
- 345
35 RPS, 345FPS, Instant Trigger Response.
Professionally upgraded by https://exmachina.uk/.
Upgrades (cost over 2k):
EdGI Custom Barrel
PROMETHEUS Hop Chamber
PROMETHEUS Bridge Nub
PDI Bucking
RETRO ARMS CNC Gearbox
PROMETHEUS Selector Plate
GUARDER Tappet Plate
RETRO ARMS Bushings x4
EZO Bearings x2
MAXX Nozzle
SHS Cylinder Head
PDI Cylinder
MODIFY Piston Head
CYMA FMR Piston
GUARDER Main Spring
SIEGETEK DSG Gear Set
LONEX ARL
WARHEAD CNC Motor
MAXX CNC Advanced Trigger
GATE TITAN Advanced
PTS EPG-C Grip
RETRO ARMS Fire Selector
RETRO ARMS Selector Cover
RETRO ARMS Trigger Pin
RETRO ARMS Mag Catch
CERAKOTE Painted
XC60 Battery Connector
Includes:
-Original Krytac Mag
- 7x Lonex Full Metal "Flash Mag" 360rd
- C240 Duo Battery Charger
- Some BBs
- NOVESKE KX3 Tracer Unit
Notes:
- Best used with EPM1s/lonex mags
- At the end of any games/events, do a very slow one-two on the trigger to reset the piston position. I set the active-braking down to the one percent but on full-auto the TITAN can still overshoot and leave the piston partially-cocked which isn't ideal for storage.
- Battery is NOT included. Must use 3S battery, large batteries may not fit, aim for 1000mah. Getting the battery in the stock compartment is a bit of an art but it can absolutely be done. If you insert the battery back-end first and then connect the leads and carefully fit them down the side of the battery, then close the cap and just give it a little jiggle to make sure the latch has clicked in place correctly. I recommend purchasing this https://nenovtechnic.eu/en/rc-elect...nther-1000mah-3s-75c-lipoly-battery-pack.html .
- At the end of every event please use the barrel cleaning rod and dry kitchen towel to clean the inner barrel, a tooth brush into the mag-well would also be ideal to remove any debris or dirt around the BB feed pipe.
Professionally upgraded by https://exmachina.uk/.
Upgrades (cost over 2k):
EdGI Custom Barrel
PROMETHEUS Hop Chamber
PROMETHEUS Bridge Nub
PDI Bucking
RETRO ARMS CNC Gearbox
PROMETHEUS Selector Plate
GUARDER Tappet Plate
RETRO ARMS Bushings x4
EZO Bearings x2
MAXX Nozzle
SHS Cylinder Head
PDI Cylinder
MODIFY Piston Head
CYMA FMR Piston
GUARDER Main Spring
SIEGETEK DSG Gear Set
LONEX ARL
WARHEAD CNC Motor
MAXX CNC Advanced Trigger
GATE TITAN Advanced
PTS EPG-C Grip
RETRO ARMS Fire Selector
RETRO ARMS Selector Cover
RETRO ARMS Trigger Pin
RETRO ARMS Mag Catch
CERAKOTE Painted
XC60 Battery Connector
Includes:
-Original Krytac Mag
- 7x Lonex Full Metal "Flash Mag" 360rd
- C240 Duo Battery Charger
- Some BBs
- NOVESKE KX3 Tracer Unit
Notes:
- Best used with EPM1s/lonex mags
- At the end of any games/events, do a very slow one-two on the trigger to reset the piston position. I set the active-braking down to the one percent but on full-auto the TITAN can still overshoot and leave the piston partially-cocked which isn't ideal for storage.
- Battery is NOT included. Must use 3S battery, large batteries may not fit, aim for 1000mah. Getting the battery in the stock compartment is a bit of an art but it can absolutely be done. If you insert the battery back-end first and then connect the leads and carefully fit them down the side of the battery, then close the cap and just give it a little jiggle to make sure the latch has clicked in place correctly. I recommend purchasing this https://nenovtechnic.eu/en/rc-elect...nther-1000mah-3s-75c-lipoly-battery-pack.html .
- At the end of every event please use the barrel cleaning rod and dry kitchen towel to clean the inner barrel, a tooth brush into the mag-well would also be ideal to remove any debris or dirt around the BB feed pipe.
