Latest activity
-
Acetech Blaster Brand new, box a little beat up but never actually used it. £55 all in. -
-
When do you know you have enough TM MWS's :unsure: Sorry for the poor quality photo, I'll endeavour to take a much better picture of the... -
Want to buy: - stock levar gas valve assebly - stock levar cheek raiser *ideally with prop bullets - levar 7 upper receiver or any... -
-
EGreat seller - great comms - quick to post! Thank you mate :)
-
Big Cheese replied to the thread VMP 2 C bolt scraping.I took mine apart to lube but it did seem pretty well lubed after inspection. Try using their v12 gas to see if that helps with the... -
Galvatron replied to the thread VMP 2 C bolt scraping.It's definitely worth opening up. The Vorsk VMP2 series doesn't come pre-lubed on the moving surfaces. It's possible that the seller was... -
Galvatron replied to the thread Price guide.Can you provide some photos of the pair to clear doubt of what they are? I seem to recall 2 versions of the M4A1 before NGRS - one with...
-
This is AKMS :) Beautiful. -
Wwrightyuk87 replied to the thread Price guide.Sig sauer TM as far as I'm aware for the p226 And as far as I'm aware it's a regular v2 gear box off top of my head around 2 spare for...
-
There’s an appraisal section which is better suited for your question. My concern would be if they’re that old if the seals in the... -
Cannonfodder replied to the thread VMP 2 C bolt scraping.Open it up and look for any signs of wear. If something is dragging along another part then there should be signs of it
-
Cannonfodder replied to the thread Price guide.The usual rule is to start at ⅔ of the lowest retail price. What make is the P226? There's a few different makes with varying prices...
-
WHello, I have just picked up a pre owned VMP2C. It worked good for a few shots but since has been very problematic. The gun works...
-
WHi I'm new here and I used to go to airsoft but I have not been for over 10 plus years and deciding to sell my gear and weapons ( I know...
-
Wwrightyuk87 replied to the thread Price Guide.Ah right I will have a look for that section thanks buddy, but yes all mags and rubbers etc are still working they have been kept well...
