Wireing Job

[JerseyRider]

Hi Guys,

I am considering wiring my rear wired M4 CQB to the front into a PEQ box, just to make life easier.

Now i have had a quick look but i was wondering if i need to replace the wiring loom so it fits to the frount? Or can i use the exsisiting wireing??

Thanks alot

Jack

 

[Deva]

I don't know but if you want to do it then just start work and if it won't reach just buy some more wire.

 

[JerseyRider]

No the wire deffently reaches because i have a crane stock so there is plently of wire. But is thicker heavy duty wire i dunno if it wll pass through

 

[Deva]

You should be able to make it fit imo, could be fiddly but it will go one way or another. If you start changing the wire to something really thin then you can have problems with resistance.

 

[JerseyRider]

MMM yer i see what you mean.... well i tell you what i will have a crack with the original wiring first then report back when and if i have failed lol

 

[Rock-climby-Dave]

it'll fit, it will be fidly and at times you will want to stab somthing, but it will fit.

just like all gearbox work really