What bb's?????

[Mattyv]

Hi guys I am waiting for the new parts for my TM VSR 10 G Spec shuld be here in a few days I want to know what bb's I shuld use as I want to buy some ready the upgrades I'm getting are:-

Laylax neo red piston

Laylax pss10. 150 spring

Laylax pss10. Spring guide

Laylax 6.03 barrel tight bore

Deepfire sears

Not to sure what my gun will be shooting some of u might have a better idea than me

Cheers

Matty V

 

[M_P]

Mad bull or Guarder are pretty good, I'd get some .4's and .43's try both and see what works vest

 

[WhiteDeath]

Blaster Devil,Tokyo Marui,G&G and Madbull make excellent BBs.

I use G&G .3g BBs for my stock VSR,I get much more consistent grouping at range and never jammed with them,compared to the Blaster.3s.

 

[Tariq]

I use G&G .3g BBs for my stock VSR,I get a little more FPS and better accuracy than with blaster BBs.

Errrmm. Is that compared to Blaster 0.3g???

That would suggest the G&G ones actually weigh less....

 

[the_robbo]

I use yellow/gold madbull 0.4g. Great because you can see them through the scope

 

[WhiteDeath]

Errrmm. Is that compared to Blaster 0.3g???

That would suggest the G&G ones actually weigh less....

Yeah,compared to blaster .3s.I dunno,maybe they used a different type of plastic or something.I compared the FPS from when I had Blaster BBs a month or so ago to last week when I used G&G BBs.The FPS difference is minimal though,like 3 or 5 FPS different.I get 280-283/285 with G&G BBs and 280-ish with Blaster BBs.

The difference is so minute it's not even worth mentioning honestly.I'll remove that part.

 

[M_P]

If your vsr is stock you'd probably benefit from using a slightly lower weight than .3's the GPS is low enough as it is on .2's. .3's would travel so slowly it'd just be ridiculous

 

[Silent7Sniper7]

you'll have an fps of 500+ so i would suggest 0.40g bb's minimum

.3's will be too light

 

[the_robbo]

That 150 spring will need bedding in. When i first put a150 in i was shooting at 525. I replaced the spring guide with a non bearing one which lost me a bit of spring compression then put 200rds through.

My vsr now shoots consistently at 498 with 0.2s. 0.4s FTW on a skirmish day

 

[Mattyv]

Thanks for ur input guys I was heading towards madbull .4s but I hear some where that they leave paint on the hop and in the barrel is this true?

Matty V

 

[the_robbo]

Can't say I've checked