We M14 GBBR

[SqueezyRollo]

Hi all, currently setting up a WE M14 and was wondering if anyone has any tips and advice on them. 
So far I’ve only bought the RA Tech trigger mech housing. On my list is a RA Tech 6.01 barrel, ML 70d monster hop rubber, RA tech NPAS KIT. 
It’s currently semi only at the moment but looking at changing this with adding the NPAS as I think I’ll get more enjoyment using it without having to worry about the MED. 

One thing I found hard to find was a low profile mount. I’ve ended up getting the WE low mount as all the others were out of stock. 

View attachment 73176

 

[Danhc92]

I've found the RA-Tech nozzle and barrel to be good investments. The barrel have great accuracy and the nozzle has lasted 6 years now. The RA-Tech bolt unfortunately was way off spec and needed a fair amount of material sanding off the receiver to get it to cycle smoothly.

Mapleleaf buckings are great with the metal c ring which helps seal and grip the nozzle. I chose 60d for 450 fps, if you are running it sub 350 the 70d will most likely be too hard, 50d will probably perform better.

I would recommend getting a proper scope that is rated to recoil, Mine destroyed 2 scopes before I switched to a vortex.

 

[SqueezyRollo]

Hey buddy thanks for the reply. When I can find the Ali nozzle I’ll be getting one. I ended up buying the NPAS kit, ratech barrel, ML monster rubber 70d and it’s already hugely improved it. Not sure what FPS it’s running at yet, need to get myself a chrono. The scope in the pic is a genuine aimpoint so that should hold up. I have ordered a Leupold replica MK4 M1 scope though. See how it holds out haha 

Some more bits to get yet 

View attachment 74922

 

[Danhc92]

No worries, you can roughlt estimate the fps with a coke can, for  below 350 the bb shouldnt go through the bottom but should go through the side from memory.