Maurice_moss
Members
- Oct 23, 2017
- 31
- 3
Hi, hoping to get some opinions on this.
WE Apache MP5K with PDW stock and one short mag.
I've had it for a fair while but never skirmished it as I couldn't get enough spare mags and moved on.
I'ts not been fired or gassed for a while so i'd expect the seals will need some silicone.
The bolt is still greased and it cocks and activated the bolt without issue.
As per the pictures the PDW stock is a bit DIY, it's bolted onto the original end cap and fits nice and solid, but isn't original. There's also a spare blank end cap which the sling point can be fitted to.
At one time this was two toned (upper receiver only) and had then been sprayed matt black, the paint has held up but it could do with a re-spray.
Cheers,
Maurice.
WE Apache MP5K with PDW stock and one short mag.
I've had it for a fair while but never skirmished it as I couldn't get enough spare mags and moved on.
I'ts not been fired or gassed for a while so i'd expect the seals will need some silicone.
The bolt is still greased and it cocks and activated the bolt without issue.
As per the pictures the PDW stock is a bit DIY, it's bolted onto the original end cap and fits nice and solid, but isn't original. There's also a spare blank end cap which the sling point can be fitted to.
At one time this was two toned (upper receiver only) and had then been sprayed matt black, the paint has held up but it could do with a re-spray.
Cheers,
Maurice.
