VSR-11 Upgrades

[SKYHAWKXx]

Hello, i am basically new to airsoft but after going for my birthday and i really want to get onto it. I have since purchased a Two Tone HFC VSR-11 with a scope and rails. I am now looking to improve the performance because it doesn't feel powerful enough out of the box to jump straight into a game.

Does anyone know how to upgrade this gun from the box and if so what are the parts i need and how could i do it. Using airsoftworld.net or other sites which are cheaper for parts.

Thanks for your help. Anything is appreciated.

Sky

 

[Liam Porter]

I'm going to recommend a site that I used to upgrade my sniper (L96), http://www.airsoftsniperparts.com/

The upgrades on there are a lot better than stock parts, but not as expensive as LayLax/PDI parts.

 

[TPI]

First off put the hairy danglers in ice because you just kicked yourself their.

Well it takes exactly the same upgrades as a vsr 10 by TM so off you trek but if by the end you have not spent 500 quid you aint done

So 1.Barrel

2.hop

3.reinforced sears

4.barrel spacers

5.new FPS spring

6.Realise sniping is boring and get an AEG!

 

[SKYHAWKXx]

I'm going to recommend a site that I used to upgrade my sniper (L96), http://www.airsoftsniperparts.com/The upgrades on there are a lot better than stock parts, but not as expensive as LayLax/PDI parts.

Thanks i'll give it a look now

 

[dazz]

From what i've been told, only the VSR Sears are compatible with the VSR-11 ?

The cylinder internals are similar to APS2?

 

[Rock-climby-Dave]

Cylinder internals are PSS10

VSR sears are VSR sears, and only VSR Sears will fit, unless you drop £200 on the Laylax zero trigger

 

[dazz]

Just to confirm (necro post here sorry) - Then HFC VSR-11 is fully VSR compatible.