VFC MP7 aeg

[Stratton Oakmont]

Just had the joy of stripping this down as it went full auto when testing it prior to posting as it was provisionally sold. 

One faulty trigger micro switch I’d the culprit. Whilst it’s open I’ll replace with a Tokyo marui hop rubber and hope that when the new microswitch arrives and I put it back together it’s one that will only need to be reopened once in a blue moon.

if you have had the pleasure of servicing a cyma/Tm m14 then this is even more fun.

 

[Rogerborg]

if you have had the pleasure of servicing a cyma/Tm m14 then this is even more fun.

Click to shrink...

Wiring through the hop unit: horrifying meme or horrifying reality?

 

[Stratton Oakmont]

Like all memes some truth in it, just a magnet and a micro switch but it’s on the outside not in the feeding area. It’s actually less of a problem than the trigger microswitch wire routing which is a going to be a joy to replicate on the new one (I don’t think)

 

[Stratton Oakmont]

If anyone has the requisite electrical skills, start making replacement mosfets for VFC mp7 sets please