Recently bought a EBB bolt m4 and it came with a suppressor that I have no clue about how to fit it or what make it is, need help to know what make it s
View attachment 36061
View attachment 36061
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Suppressor
- Thread starter Dritler
- Start date
Hi
Normally you would unscrew the flash hider from the front of the barrel and then screw that on to the end of the barrel. All the suppressors I have seen have a 14mm female threaded hole one one end, so that is the end you screw on.
Sometimes you need to screw it on the opposite direction you would normally screw something, i.e. counter clockwse.
I don't know the brand though.
Cheers
G
Normally you would unscrew the flash hider from the front of the barrel and then screw that on to the end of the barrel. All the suppressors I have seen have a 14mm female threaded hole one one end, so that is the end you screw on.
Sometimes you need to screw it on the opposite direction you would normally screw something, i.e. counter clockwse.
I don't know the brand though.
Cheers
G
PopRocket123
Members
- Dec 12, 2016
- 1,518
- 778
That's a nuprol QD suppressor. It comes with a specific muzzle break that it slides onto then you twist the collar and it locks on. Have you got a photo of the muzzle break that's on the gun?
- Thread starter
- #4
PopRocket123
Members
- Dec 12, 2016
- 1,518
- 778
That's not the nuprol one so I doubt it'll lock on. You can try though. The notch on the muzzle brake is the bottom, align the suppressor so the catch on the collar is at the top and have a fiddle to see if you can make it fit, try both positions on the catch.
callumbagshaw
Members
- Mar 7, 2011
- 406
- 31
The flash hider already attached looks a lot better than that suppressor will anyway IMO, nice piece 
Similar threads
