nicholas-c
Members
- Feb 1, 2012
- 51
- 6
Hey guys Since it's christmas I want to treat myself., I have been an airsofter for almost 2 years and had my own weapon for at least a year and half (KWA SR10). All work done on the gearbox and so on is my own and I love my gun but as of late it's been getting worse and worse... It's not my current upgrades/repairs that are the issues it's the first few I did (Didn't bother putting certain screws back etc) that and my gun is generally getting old and scratched up nasty anyway.
The question is... Which option do I go down?
1) Replace the entire weapon and build a new different project (thinking L129A1 British marksman rifle)
2) Buy a new SR10 and transfer the ASCU.
3) Strip/prime/paint body and replace the gearbox (Housing is damaged slightly) along with brand new internals (all gears/piston etc are stock) and transfer my ASCU with a new high speed motor?
If I was going to build a L129A1 I don't know what I would use as a base. I would want full auto as I use 3-round burst too much to go DMR but want the "slot" in the rail and the unibody.
So... Let me have your suggestions/tips!
Thanks (And merry christmas)
Nick
The question is... Which option do I go down?
1) Replace the entire weapon and build a new different project (thinking L129A1 British marksman rifle)
2) Buy a new SR10 and transfer the ASCU.
3) Strip/prime/paint body and replace the gearbox (Housing is damaged slightly) along with brand new internals (all gears/piston etc are stock) and transfer my ASCU with a new high speed motor?
If I was going to build a L129A1 I don't know what I would use as a base. I would want full auto as I use 3-round burst too much to go DMR but want the "slot" in the rail and the unibody.
So... Let me have your suggestions/tips!
Thanks (And merry christmas)
Nick
