Eenthuncob
Members
- Feb 11, 2016
- 213
- 19
- Thread starter
- #21
Wh
What I did was get a normal buffer tube that will fit the gun (or the one you’ve already got) and remove the notices and metal from the bottom of it where the stock would attach and click into its different positions. Then get any sharp edges off by sanding.
After the buffer tube is smooth attach it to your gun and put the UBR stock in place making sure it’s straight and then use the screw holes in the bottom on the UBR stock to tighten it in place.
Im at work at the moment so can’t get any pictures for you but I’ll put some up if needed.
hope this helps.
What I did was get a normal buffer tube that will fit the gun (or the one you’ve already got) and remove the notices and metal from the bottom of it where the stock would attach and click into its different positions. Then get any sharp edges off by sanding.
After the buffer tube is smooth attach it to your gun and put the UBR stock in place making sure it’s straight and then use the screw holes in the bottom on the UBR stock to tighten it in place.
Im at work at the moment so can’t get any pictures for you but I’ll put some up if needed.
hope this helps.
